From Surf Wiki (app.surf) — the open knowledge base
Yamaha XV1100
| Field | Value |
|---|---|
| name | Yamaha Virago XV1100 |
| image | 1994 yamaha virago 1100.jpg |
| manufacturer | Yamaha Motor Company |
| production | 1986-1999 |
| predecessor | Yamaha XV1000 |
| successor | Yamaha DragStar 1100 |
| class | Cruiser |
| engine | 1063 cc, air cooled, 2 x SOHC, wet sump |
| bore_stroke | 95 × |
| compression | 8.3:1 |
| ignition | Digital |
| transmission | Wet multi-plate clutch, 5 speed, shaft drive |
| frame | Pressed steel backbone |
| suspension | Front: telescopic fork, 150 mm travel |
| Rear: swingarm, 97 mm travel | |
| brakes | Front: Dual 282 mm discs |
| Rear: drum | |
| tires | Cast 5-spoke aluminium alloy wheels. Front: 100/90-19 57H |
| Rear: 140/90-15M/C 70H | |
| rake_trail | 32°, 129 mm |
| wheelbase | 1525 mm |
| length | 2285 mm |
| width | 840 mm |
| height | 1190 mm |
| seat_height | 715 mm |
| fuel_capacity | 16.8 L |
| related | Yamaha DragStar 1100 |
Rear: swingarm, 97 mm travel Rear: drum Rear: 140/90-15M/C 70H
The Yamaha Virago XV1100 is a motorcycle manufactured by Yamaha Motor Corporation between 1986 and 1999. It was one of several in the Virago line and was positioned as a large-size cruiser with an engine displacement of 1063 cc.
It was one of the few cruiser-style motorcycles available with a shaft drive instead of a chain or belt final drive system, as well as a V-twin engine of that size. Its heavily chromed body styling was also distinctive.
History
The Virago line was born in 1981 with the XV750. In 1982, the larger 920 was introduced alongside the 750, with several more deluxe features. The 920 was redesigned in 1984 and engine size increased to 981 cc resulting in the renamed XV1000. In 1986, engine size was again increased to 1,063 cc, resulting in the renamed XV1100.
This model was discontinued in 2000 as the "Star" range of motorcycles took over as the cruiser line from Yamaha. The DragStar 1100 is often seen as the successor to the XV1100.
Starter problems
According to Motorcyclist magazine, the early Virago has a design flaw in the starter system. This magazine states that the starter's defect exists in early Virago models (1982 and 1983). However, the same flawed starter system was installed in the early (1984–85) XV700, which was produced until 1987, and the XV920. The XV1000 had an improved system since it began production in 1984, which doesn't present the flaws. Also the XV1100, XV700 and the XV750 (1986 and up) do not present the starter system flaws found in the earlier Viragos.
Motorcyclist Magazine suggested welding the ring gear to its backing plate to solve the problem. Other solutions commonly used are the use of shims, which was Yamaha's proposed solution, then also the use of a newly designed idler gear. None of these solutions are considered or proved to be permanent, and applying only one of them will not address other existing flaws in the system; however, great improvements have been reported by Virago owners that have applied them.
References
References
- Minton, Joe. (January 1988). "How to improve Yamaha's V-twin".
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about Yamaha XV1100 — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report