From Surf Wiki (app.surf) — the open knowledge base
Wunderlich (vacuum tube)
Wunderlich refers to a series of vacuum tubes introduced in the early 1930s. Wunderlichs were designed to be used as full-wave detectors in AM radio receivers. However, because of their unusual design, they were rarely used in commercially manufactured receivers. The tube is named for its inventor, Norman Wunderlich.
Structure
The Wunderlich tube is a twin medium-mu triode. The tube has two identical control grids that operate in tandem with a common heater, indirectly heated cathode and plate.
Function
Typically, the two grids are connected to opposite ends of the center-tapped secondary of the final IF transformer. The center tap of the secondary is then connected to ground through a parallel-connected resistor and capacitor circuit. This causes the tube to act as a full-wave grid leak detector. In some circuits, the center tap also provides AVC bias voltage to the converter and/or IF amplifier. Some Wunderlichs, like the Wunderlich B, have a diode plate or a second grid that provide AVC bias voltage.
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about Wunderlich (vacuum tube) — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report