From Surf Wiki (app.surf) — the open knowledge base
Velocette Viper
| Field | Value |
|---|---|
| name | Velocette Viper |
| image | Flickr - ronsaunders47 - VELOCETTE VIPER-WITH ENGINE FAIRING.jpg |
| image_size | 250px |
| manufacturer | Velocette |
| production | 1955-1968 |
| engine | 349 cc, OHV air cooled single |
| top_speed | 91 mph |
| power | 28 bhp @ 7,000 rpm |
| brakes | drum brakes |
| wheelbase | 53.25 in |
| dry_weight | 364 lb |
| fuel_capacity | 3.5 gallons |
| turning_radius | 16 ft |
The Velocette Viper is a British motorcycle made by Velocette between 1955 and 1968. Built using traditional methods and materials, it struggled to compete against more modern machines, so from 1960 the designers added new glass fibre enclosure panels, making the Viper one of the first enclosed production motorcycles.
Development
Introduced in October 1955, the single-cylinder Viper was developed from the 500cc Velocette MSS which also led to the almost identical 500cc Velocette Venom. Designed by Charles Udall, the Viper's 349cc engine had a bi-metal cylinder with a cast iron liner, high compression piston and a light alloy cylinder head. Using the same bottom end as the Venom, the Viper had a lot of chrome plating and was offered in a choice of black or "willow green" paintwork. The Viper was one of the first to have glass fibre enclosure panels from 1962. These panels extended from the front of the engine, level with the top of the crankcase, to the rear pillion footrests. but proved unpopular with the traditional buyers of Velocette singles.
Viper Clubman
From 1960 Velocette produced the Viper in a "Clubman" racing version, fitted with TT Amal carburettors, a BTH racing magneto and a close ratio gearbox, with the compression ratio raised to 9.3 to 1. The Clubman dispensed with the unpopular glass fibre enclosure and instead made a feature of its highly polished crankcase and gearbox castings. Supplied with "rearset" controls, lowered handlebars and a steering damper, the Clubman also had a range of optional accessories including a "megaphone" exhaust silencer, a rev counter and light alloy wheel rims.
Viper Scrambler
In December 1958 the Velocette development team built 25 off-road Vipers, which were sent to the United States for evaluation in enduro events. Built to the Viper Clubman standard, the Scrambler had a specially lightened frame and high level enduro style exhaust pipes.
Viper Special
The Velocette Viper Special was introduced in November 1962 and featured a three-gallon tank, pressed steel full width hub and the Velocette MSS rear hub as well as a '100 mph' speedometer in a modified headlamp nacelle.
References
References
- Currie, Bob. (1980). "Great British Motorcycles of the Fifties". Hamlyn Publishing Group Ltd.
- Bacon, Roy. (1988). "British Motorcycles of the 60's". Osprey Publishing.
- Gibbison, David. "Velocette Evolution".
- "Velocette Viper Scrambler".
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about Velocette Viper — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report