From Surf Wiki (app.surf) — the open knowledge base
Tricam
Type of rock climbing protection
Type of rock climbing protection

A tricam is a type of climbing protection equipment. A versatile nut/cam hybrid, the Tricam was invented by Greg Lowe in 1973, and came to market in 1981. They are currently manufactured by C.A.M.P. of Premana Italy.
Design
The Tricam is a passive camming device consisting of a carefully shaped aluminium-alloy cam attached to a length of webbing tape. Most sizes are produced as a solid forged unit, but the larger sizes are made from riveted sheet metal.
The device is inserted into a crack so that pulling on the tape makes the piece cam outward against the sides of the crack, gripping the rock tighter. Camming action is achieved by the position of the pointed fulcrum or pivot of the cam relative to the attachment of the tape. As the webbing is pulled, the downward force is pivoted onto the point, which can bite into soft rock or ice and increases the holding power of the tricam.
Benefits
Tricams are not as easy to place or remove as spring-loaded camming devices (SLCDs) but are cheaper and lighter. Some cracks and pods too shallow to protect with SLCDs are easily protected with tricams. They have no moving parts to freeze, making them an excellent choice for a mountaineer's rack. They can also be used as nuts.
Drawbacks
Placing a Tricam takes practice to achieve proficiency. Care must be taken so the Tricam does not loosen while climbing above it due to rope drag. Typically, this additional safety is provided by clipping a longer sling to the tricam. Tricams can "weld" into the placement after being subjected to a hard fall, making them hard to clean and likely to be left behind.
Specifications
Tricams are available in a range of sizes to suit cracks from 10–140 mm wide. They are especially useful in horizontal cracks, quarry drill holes, and limestone pockets, where they may be the only type of protection that works. The smallest size can also work well in old piton scars.
As manufactured they come in size numbers 0.125 to 7, with strength 2–22 kN, width 10–140 mm, and weight 9–264 g.
Gallery
File:Climbing gear - Lowe tricams - 03.jpg|Typical placement of no. 0.5 Tricam File:Climbing gear - Lowe tricams - 04.jpg|No. 1.5 Tricam in a placement where few other pieces would work File:Tricam 7 placed.jpg|A no. 7 Tricam placed in a wide crack File:Tricams.side.JPG|Set of Tricams
References
References
- (2003–2009). "[[Mountaineering: The Freedom of the Hills]]". The Mountaineers.
- [https://web.archive.org/web/20110708112723/http://www.camp-usa.com/products/product-manuals/2008/CAMP-Tricams-Hexes-Nuts.pdf], CAMP product manual, retrieved 2008-07-04
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about Tricam — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report