Surf Wiki
Save to docs
general/control-theory

From Surf Wiki (app.surf) — the open knowledge base

Terminal sliding mode

In the early 1990s, a new type of sliding mode control, named terminal sliding modes (TSM) was invented at the Jet Propulsion Laboratory (JPL) by Venkataraman and Gulati. TSM is robust non-linear control approach.

The main idea of terminal sliding mode control evolved out of seminal work on terminal attractors done by Zak in the JPL, and is evoked by the concept of terminal attractors which guarantee finite time convergence of the states. While, in normal sliding mode, asymptotic stability is promised which leads to the convergence of the states to the origin. But this convergence may only be guaranteed within infinite time. In TSM, a nonlinear term is introduced in the sliding surface design so that the manifold is formulated as an attractor. After the sliding surface is intercepted, the trajectory is attracted within the manifold and converges to the origin following a power rule.

There are some variations of the TSM including: Non-singular TSM, Fast TSM,

Terminal sliding mode also has been widely applied to nonlinear process control, for example, rigid robot control etc.. Several open questions still remain on the mathematical treatment of the system's behavior at the origin since it is non-Lipschitz.

Control Scheme

Consider a continuous nonlinear system in canonical form

\overset{\cdot}{x}{1}(t) =x{2}(t) ......

\overset{\cdot}{x}{n-1}(t) =x{n}(t)

\overset{\cdot}{x}_{n}(t)=a(x)+b(x)u(t)

where x(t)\in R^{n} is the state vector, u\in R is the control input, a(x) and b(x) are nonlinear functions in x(t). Then a sequence of terminal sliding surfaces can be designed as follows:

s_{1}(t) =\overset{\cdot }{s}_{0}(t)+\alpha {1}(t)s{0}^{\gamma _{1}}(t)

s_{2}(t) =\overset{\cdot }{s}_{1}(t)+\alpha {2}(t)s{1}^{\gamma _{2}}(t) ......

s_{n-1}(t) =\overset{\cdot }{s}{n-2}(t)+\alpha {n-1}(t)s{n-2}^{\gamma {n-1}}(t) where s{0}(t)=x{1}(t) and \gamma {i}=\frac{p{i}}{q_{i}}, i=1,2,...,n-1 . p_{i}, q_{i} are positive odd numbers and p_{i}\leq q_{i}.

References

Venkataraman, S., Gulati, S., Control of Nonlinear Systems Using Terminal Sliding Modes J. Dyn. Sys., Meas., Control, Sept 1993, Volume 115, Issue 3.

References

  1. (June 1992). "1992 American Control Conference".
  2. (2002-12-01). "Non-singular terminal sliding mode control of rigid manipulators". Automatica.
  3. (February 2002). "Fast terminal sliding-mode control design for nonlinear dynamical systems". [[IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications]].
Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

control-theory
Want to explore this topic further?

Ask Mako anything about Terminal sliding mode — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report