Tantalum(V) ethoxide

Structure

Tantalum(V) alkoxides typically exist as dimers with octahedral six-coordinate tantalum metal centres. Subsequent crystallographic analysis established that the methoxide and isopropoxides of niobium adopt bioctahedral structures. From a geometric perspective, the ten ethoxide ligand oxygen atoms of the Ta2(OEt)10 molecule in solution define a pair of octahedra sharing a common edge with the two tantalum atoms located at their centres. From a bonding perspective, each tantalum centre is surrounded octahedrally by four monodentate and two bridging ethoxide ligands. The oxygen atoms of the bridging ethoxides are each bonded to both tantalum centres, and these two ligands are cis to one another within the coordination sphere. The formula [(EtO)4Ta(μ-OEt)]2 more comprehensively represents this dimeric structure, although the simplified formula is commonly used for most purposes.

Preparation

Several approaches are known for preparing tantalum(V) ethoxide. Salt metathesis from tantalum(V) chloride is generally the most successful. Tantalum pentachloride, Ta2Cl10, provides a convenient starting point. To avoid the generation of mixed chloride-ethoxide species, a base such as ammonia is usually added to trap liberated HCl: :10 EtOH + Ta2Cl10 + 10 NH3 → Ta2(OEt)10 + 10 NH4Cl

Salt metathesis using an alkali metal alkoxide can be used as well:

:10 NaOEt + Ta2Cl10 → Ta2(OEt)10 + 10 NaCl

The same compound can be prepared electrochemically. The two half-equations and the overall equation for this reaction are: :cathode: 2 EtOH + 2 e− → 2 EtO− + H2 :anode: Ta → "Ta5+" + 5 e− :overall: 2 Ta + 10 EtOH → 2 "Ta5+" + 10 EtO− + 5 H2 → Ta2(OEt)10 + 5 H2

Commercial production of tantalum(V) ethoxide using this electrochemical approach has been employed in Russia. The compound can also be prepared by direct reaction of tantalum metal with ethanol, in which case the overall equation is the same as that shown above for the electrochemical approach.

Since the 1970s, Bayer of Germany had been producing tantalum(V) ethoxide in Leverkusen, however following the break-up of Bayer, production moved to Heraeus. Meanwhile, Inorgtech (later MultiValent), started production in 1974 in Cambridge, UK. Both routes involved the direct reaction of the metal chloride with alcohol in the presence of solvents to give a product of 99.999%+ purity.

Reactions

The most important reaction of tantalum alkoxides is hydrolysis to produce films and gels of tantalum oxides. Although these reactions are complex, the formation of a tantalum(V) oxide film by hydrolysis can be described by this simplified equation: :Ta2(OC2H5)10 + 5 H2O → Ta2O5 + 10 C2H5OH

Tantalum(V) ethoxide optical coatings can be produced by low pressure chemical vapour deposition. At pressures as low as 1.33 mPa and temperatures of 700 °C, a silica film of the desired depth is first deposited by the decomposition of tetraethoxysilane, Si(OEt)4, or di-t-butyoxydiacetoxysilane, Si(OC(CH3)3)2(OOCCH3)2, then tantalum(V) ethoxide is introduced. As in the case of niobium(V) ethoxide, the ethoxide precursor thermally decomposes to produce the oxide layer with the associated release of diethyl ether:

:Ta2(OEt)10 → Ta2O5 + 5 Et–O–Et

Pyrolysis also produces a tantalum(V) oxide film by chemical vapor deposition in which case the tantalum(V) ethoxide is completely oxidised, producing carbon dioxide and water vapor:

:Ta2(OC2H5)10 + 30 O2 → Ta2O5 + 20 CO2 + 25 H2O

Amorphous tantalum(V) oxide films can also be prepared by atomic layer deposition or by a pulsed chemical vapour deposition technique in which tantalum(V) ethoxide and tantalum(V) chloride are applied alternately.

:Ta2(OC2H5)10 + Ta2Cl10 → 2 Ta2O5 + 10 C2H5Cl

Sol-gel processing also produces thin films of tantalum(V) oxide using a similar chemical approach. Sol-gel routes using tantalum(V) ethoxide to generate layered perovskite materials have also been developed.

Applications

It is mainly used for the manufacture of tantalum(V) oxide thin-film materials by approaches including chemical vapor deposition, atomic layer deposition, and sol-gel processing. These materials have semiconductor, electrochromic, and optical applications.

Tantalum(V) oxide films have a variety of applications including as optical films with refractive indices as high as 2.039 and as a thin-film dielectric material in dynamic random access memory and semiconductor field-effect transistors. Chemical vapour deposition allows control of the thickness of the film on a nanometre scale, which is essential for some applications. Direct pyrolysis is convenient for optical applications, Electrochromism is the property of some materials to change color when charge is applied, and is the means by which so-called smart glass operates. Films produced by tantalum(V) ethoxide hydrolysis has been used to prepare amorphous tantalum(V) oxide films suitable for electrochromic applications.

Mixed-metal thin-films have also been prepared from this compound. For example, lithium tantalate, LiTaO3, films are desirable for their non-linear optical properties and have been prepared by first reacting tantalum(V) ethoxide with lithium dipivaloylmethanate, LiCH(COC(CH3)3)2, to prepare a precursor suitable for metalorganic vapour phase epitaxy (a form of chemical vapor deposition). Films of strontium tantalate, Sr(TaO3)2, have also been prepared using atomic layer deposition approaches and their properties investigated.

Tantalum(V) ethoxide condenses with carboxylic acids to give oxo-alkoxide-carboxylates, e.g., Ta4O4(OEt)8(OOCCH3)4. The Ta4O4 core of such compounds form a cubane-type cluster.

References

References

1. "Tantalum (V) ethoxide 99.98% trace metals basis". Sigma Aldrich.
2. {{RubberBible87th
3. (1968). "Nuclear Magnetic Resonance Studies on Niobium and Tantalum Penta-alkoxides". [[J. Chem. Soc. A]].
4. (1961). "Metal Oxide Alkoxide Polymers: Part II. The Hydrolysis Of Tantalum Pentaethoxide". [[Can. J. Chem.]].
5. (1997). "Progress in Inorganic Chemistry". [[John Wiley & Sons]].
6. (1996). "Tantalum(V) Alkoxides: Electrochemical Synthesis, Mass-Spectral Investigation and Oxoalkoxocomplexes". [[Polyhedron (journal).
7. (2001). "Alkoxo and Aryloxo Derivatives of Metals". [[Academic Press]].
8. Baumeister, P. W.. (2004). "Optical Coating Technology". [[SPIE Press]].
9. (2000). "Atomic Layer Deposition and Chemical Vapor Deposition of Tantalum Oxide by Successive and Simultaneous Pulsing of Tantalum Ethoxide and Tantalum Chloride". [[Chem. Mater.]].
10. (2008). "Metallic Biomaterial Interfaces". [[John Wiley & Sons]].
11. Nalwa, H. S.. (2001). "Handbook of Advanced Electronic and Photonic Materials and Devices: Chalcogenide Glasses and Sol-Gel Materials". [[Academic Press]].
12. (2012). "Optical Properties of High Refractive Index Thin Films Processed at Low-Temperature". [[Opt. Mater.]].
13. "Method For Fabricating A Nitride Read-Only-Memory (NROM)".
14. Mortimer, R. J.. (2011). "Electrochromic Materials". [[Annual Review of Materials Research.
15. (1999). "Optical Properties Of Sol-Gel Dip-Coated Ta₂O₅ Films For Electrochromic Applications". Solar Energy Materials and Solar Cells.
16. (1993). "Solid-Phase Epitaxial-Growth Of Lithium Tantalate Thin-Films Deposited By Spray-Metalorganic Chemical-Vapor-Deposition". [[Appl. Phys. Lett.]].
17. (2001). "SrTa₂O₆ Thin Films Deposited By Plasma-Enhanced Atomic Layer Deposition". [[Jpn. J. Appl. Phys.]].
18. Schubert, U.. (2003). "Comprehensive Coordination Chemistry II". [[Pergamon]].