From Surf Wiki (app.surf) — the open knowledge base
Speed skiing
Type of sport
Type of sport
.jpg)
Speed skiing is the sport of skiing downhill in a straight line at as high a speed as possible, as timed over a fixed stretch of ski slope. There are two types of contest: breaking an existing speed record or having the fastest run at a given competition. Speed skiers regularly exceed 200 km/h
History
Speed skiing dates from 1898 with a run by American Tommy Todd, reported at 87 mph. Official records began with an 89 mph run by Leo Gasperl in 1932. While training for the 1956 Winter Olympics, American downhiller Ralph Miller is credited with being the first to break 100 mph, at nearly 109 mph in August 1955 at Portillo, Chile, a record which held up for fifteen years.
In 1978, also at Portillo, American Steve McKinney's record-breaking run of 200.2 km/h made him the first to break the 200 km/h barrier. It was a demonstration sport at the Albertville 1992 Winter Olympics on the Les Arcs speed skiing course, but was deemed too dangerous after several recorded deaths.
Description
Speed skiing is practiced on steep, specially designed courses 1 km in length. There are approximately thirty of these courses worldwide, many of them at high altitudes to minimize air resistance. The first 300 or of the course (the launching area) is used to gain speed, the top speed is measured in the next 100 m (the timing zone) and the last 500 m (the run-out area) is used for slowing down and coming to a stop. The start point in FIS races is chosen so that, in theory, skiers should not exceed 200 km/h, hence competition is aimed at winning a particular event, not breaking world speed records. At pro races, there is no maximum speed and the speed attained is determined by conditions and safety.
In theory, speeds could continue to increase by using even longer and steeper slopes; this would eventually change speed skiing into something closer to skydiving except with skis rather than a parachute. Since a slight bump or gentle turn can easily prove fatal at such speeds, there is little appetite for this.
Equipment
Speed skiers wear dense foam fairings on their lower legs and aerodynamic helmets to increase streamlining. Their ski suits are made from air-tight latex or have a polyurethane coating to reduce wind resistance, with only a minimal (but mandatory) back protector to give some protection in the case of a crash. | editor-last = Vizard | editor-first = Frank
The special skis used must be in length and at most 10 cm wide, with a maximum weight of 15 kg for the pair. Ski boots are attached to the skis by bindings. The ski poles are bent to shape around the body, with a minimum length of 1 m.
Official world records
The following records were set under FSV (France Ski de Vitesse) rules at Vars, France:
- Men – Simon Billy (France) 255.500 km/h on March 22, 2023. | access-date = 2023-03-24}}
- Women – Valentina Greggio (Italy) 247.083 km/h (153.530 mph) on 26 March 2016.
References
References
- (September 5, 1955). "A roundup of the week's news: record breakers".
- Miller, Peter. (September 1999). "How fast can I go?".
- Masia, Seth. (June 2009). "Ralph Miller: from wax room to classroom".
- "Speed Champion Steve Mc Kinney's 120-Mph Runs Make Downhill Racers Seem Snowbound : People.com".
- (February 7, 1983). "Video". CNN.
- Usborne, Simon. (2018-02-09). "Speed skiing: too fast for the Olympics".
- Munroe, Randall. (2019). "how to: Absurd Scientific Advice for Common Real-World Problems". Penguin.
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about Speed skiing — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report