Surf Wiki
Save to docs
general/chemical-synthesis

From Surf Wiki (app.surf) — the open knowledge base

Solvothermal synthesis

Solvothermal synthesis
Schematic diagram of solvothermal synthesis setup: (1) stainless steel autoclave (2) precursor solution (3) Teflon liner (4) stainless steel lid (5) spring

Solvothermal synthesis is a method of producing chemical compounds, in which a solvent containing reagents is put under high pressure and temperature in an autoclave. Many substances dissolve better in the same solvent in such conditions than at standard conditions, enabling reactions that would not otherwise occur and leading to new compounds or polymorphs. Solvothermal synthesis is very similar to the hydrothermal route; both are typically conducted in a stainless steel autoclave. The only difference being that the precursor solution is usually non-aqueous.

Solvothermal synthesis has been used prepare MOFs, titanium dioxide, and graphene, carbon spheres, chalcogenides and other materials.

Solvents

Besides water (hydrothermal synthesis), solvothermal syntheses make use of a large range of solvents, including ammonia, carbon dioxide, dimethylformamide, and various alcohols such as methanol, or glycols such as hexane-1,6-diol.

Formic acid as reaction medium

Formic acid decomposes at high temperatures to carbon dioxide and hydrogen or carbon monoxide and water. This property allows formic acid to be used as a reducing and carbon dioxide-rich reaction medium in which it is possible to form various oxides and carbonates.

Ammonia as reaction medium

The critical temperature and pressure of ammonia are 132.2°C and 111bar. In these conditions, it is possible to obtain a range of amides, imides, and nitrides. Although its dielectric constant is lower than that of water, ammonia behaves as a polar solvent especially at high pressures.

References

References

  1. Demazeau, G.. (2008). "Solvothermal reactions: an original route for the synthesis of novel materials". J. Mater. Sci..
  2. (2019). "Introduction to Reticular Chemistry: Metal-Organic Frameworks and Covalent Organic Frameworks". [[Wiley-VCH]].
  3. (2010). "Rational Design, Synthesis, Purification, and Activation of Metal−Organic Framework Materials". Accounts of Chemical Research.
  4. (2014). "Highly reactive {001} facets of TiO2-based composites: Synthesis, formation mechanism and characterization". Nanoscale.
  5. (2012). "Graphene-based semiconductor photocatalysts". Chem. Soc. Rev..
  6. (2002). "Direct synthesis of uniform hollow carbon spheres by a self-assembly template approach". Chemical Communications.
  7. (1999). "Low temperature route towards new materials: Solvothermal synthesis of metal chalcogenides in ethylenediamine". Coordination Chemistry Reviews.
  8. Rabenau, Albrecht. (1985). "The Role of Hydrothermal Synthesis in Preparative Chemistry". Angewandte Chemie International Edition in English.
  9. (2010). "Springer handbook of crystal growth". Springer.
Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

chemical-synthesis titanium-compounds
Want to explore this topic further?

Ask Mako anything about Solvothermal synthesis — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report