Surf Wiki
Save to docs
general/linkages-mechanical

From Surf Wiki (app.surf) — the open knowledge base

Slider crank chain inversion

Slider crank chain inversion
Back hoe
The linear actuators of a back hoe form inverted slider-crank linkages.
Back hoe actuator
Close-up of the linear actuator of a back hoe that forms an inverted slider-crank.
Linear actuator
Linear actuator actuates an inverted slider crank.

Slider-crank chain inversion arises when the connecting rod, or coupler, of a slider-crank linkage becomes the ground link, so the slider is connected directly to the crank. This inverted slider-crank is the form of a slider-crank linkage that is often used to actuate a hinged joint in construction equipment like a crane or backhoe, as well as to open and close a swinging gate or door.

Slider-crank and its inversions

A slider-crank is a four-bar linkage that has a crank that rotates coupled to a slider that moves along a straight line.

This mechanism is composed of three important parts: The crank which is the rotating disc, the slider which slides inside the tube and the connecting rod which joins the parts together. As the slider moves to the right the connecting rod pushes the wheel round for the first 180 degrees of wheel rotation. When the slider begins to move back into the tube, the connecting rod pulls the wheel round to complete the rotation.

Inversions

Different mechanism by fixing different link of slider crank chain are as follows :

;First inversion This inversion is obtained when link 1 (ground body) is fixed. Application- Reciprocating engine, Reciprocating compressor etc...

;Second inversion This inversion is obtained when link 2 (crank) is fixed. Application- Whitworth quick return mechanism, Rotary engine, etc...

;Third inversion This inversion is obtained when link 3 (connecting rod) is fixed. Applications - Slotted crank mechanism, Oscillatory engine etc..,

;Fourth inversion This inversion is obtained when link 4 (slider) is fixed. Application- Hand pump, pendulum pump or Bull engine, etc.

References

References

  1. Design of Machinery 3/e, Robert L. Norton, 2 May 2003, McGraw Hill. {{ISBN. 0-07-247046-1
  2. Myszka, David. (2012). "Machines and Mechanisms: Applied Kinematic Analysis". Pearson Education.
  3. [https://books.google.com/books?id=jv9mQyjRIw4C&q=geometric+design+of+linkages J. M. McCarthy and G. S. Soh, '''Geometric Design of Linkages,''' 2nd Edition, Springer 2010]
Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

linkages-(mechanical)
Want to explore this topic further?

Ask Mako anything about Slider crank chain inversion — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report