From Surf Wiki (app.surf) — the open knowledge base
Siemens-Halske Sh.III
| Field | Value |
|---|---|
| name | Sh.III |
| image | File:Siemens-Halske Sh.IIIa.jpg |
| caption | A Siemens-Halske Sh.III at the Museo Storico dei Motori e dei Meccanismi in, Palermo, Italy |
| engine_type | Counter Rotary engine |
| national_origin | Germany |
| manufacturer | Siemens-Halske |
| major_applications | Siemens-Schuckert D.III and D.IV |
| number_built | approx 1,200 |
| developed_from | Siemens-Halske Sh.1 |
The Siemens-Halske Sh.III was an 11-cylinder, air-cooled counter rotary engine developed in Germany during World War I. The engine was a development of the earlier 9-cylinder Siemens-Halske Sh.I.
Design

The Siemens-Halske Sh.III was an 11-cylinder counter rotary engine. The Sh.III's propeller and cylinders were connected, rotating anti-clockwise when viewed from the front of the aircraft (clockwise when viewed from the pilot's seat) while the crankshaft rotated clockwise.
The crankshaft was driven at 900 rpm via a set of bevel gears, located at the back of the engine, with a 2:1 ratio. The cylinders and propeller would have rotated at a speed of 1800 rpm anti-clockwise had the crankshaft been fixed. With the crankshaft rotating at 900 rpm clockwise the net propeller rotational speed was reduced to 900 rpm.
The counter rotary design allowed the engine to achieve the benefits of a high-power density from a high rotational speed while the propeller operated at a slower speed optimised for its design. By the end of WW1, operating the propeller at a slower speed than the engine had become normal practice for inline and V block engines but had proved difficult to accomplish on rotary engines.
Additional benefits of the counter rotary design were lower aerodynamic losses and reduced gyroscopic forces as the net cylinder rotational speed was reduced when compared to a conventional rotary of similar power output.
Unlike most rotary engines the Sh.III had a throttle which could reduce engine speed to 350 rpm.
The Sh.III was initially designed with a power output of 160 hp. A later variant, the Sh.IIIa, had a power output of 200 hp with some examples developing as much as 240 hp.
In operation the Sh.III suffered from poor reliability. The engine tended to overheat as the relatively slow rotation of the cylinders limited cooling air flow. Additionally, seizures of the engine were caused by poor lubrication as the Germans did not have access to castor oil which was one of the few oils that could retain its properties after being mixed with gasoline.
Aircraft
- Albatros H.1
- Albatros D.XI
- Pfalz D.VII
- Pfalz D.VIII
- LFG Roland D.IX
- LFG Roland D.XVI
- Siemens-Schuckert D.II
- Siemens-Schuckert D.III
- Siemens-Schuckert D.IV
- Siemens-Schuckert D.VI
Specifications
and start a new, fully formatted line with -- |power/weight=0.375 hp/lb
References
References
- (2012). "The Rotary Aero Engine from 1908 to 1918". Springer.
- Gray, Peter L. (1966). "The Siemens Schuckert D.III and D.IV". Profile Publications.
- Page, Major Victor W. (1929). "The Modern Aviation Engine". The Norman W Henley Publishing Company.
- (1921). "Airplane Engine Encyclopedia: An Alphabetically Arranged Compilation of all Available Data on the World's Airplane Engines". The Otterbein Press.
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about Siemens-Halske Sh.III — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report