Skip to content
Surf Wiki
Save to docs
general/dinghies

From Surf Wiki (app.surf) — the open knowledge base

RS200 (dinghy)

Design of two-person racing dinghy


Summary

Design of two-person racing dinghy

FieldValue
nameRS200
imageRS200 april 2011.JPG
captionAn RS200 sailing on Lake Garda, Italy.
class_imagesize120
crew2
typePolyester GRP with Coremat. Vinylester resin infusion with coremat 2021 onwards
constructionFiberglass
rigAluminium alloy spars
loa13 ft
beam6 ft
draft3.707349 ft
hull172 lb
mainsailandjib124 sqft
mainsail98.27 sqft
jib29.7 sqft
spinnaker89 sqft
d-pn88.3
rya-pn1046
year1995
designerPhil Morrison

|d-pn = 88.3 |rya-pn = 1046

The RS200 is a 4m, double handed, hiking, racing dinghy. Designed in 1995 by Phil Morrison and manufactured by RS Sailing, it has a lightweight polyester GRP with Coremat hull construction.

Performance and design

The RS200 utilises a single line asymmetrical spinnaker system and low sheet loads on the sail controls. It can be sailed successfully by pairs of sailors with combined weights of between 16 stone and 26 stone. Both sailors hike; there are no trapezes or wings. The open transom assists drainage after a capsize and a moulded self bailer can be opened to remove any remaining water.

References

References

  1. "Centerboard Classes". US Sailing.
  2. "Portsmouth Number List 2015". Royal Yachting Association.
  3. [http://www.sailingnetworks.com/design/d-rs-200 Sailing Networks]
Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

Want to explore this topic further?

Ask Mako anything about RS200 (dinghy) — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report