From Surf Wiki (app.surf) — the open knowledge base
Roland OP-8
The Roland OP-8 interface was designed to control Roland polyphonic synthesizers that were equipped with a DCB (Digital Control Bus) interface via the Roland MC-4 Microcomposer. The OP-8 and synthesizer were connected together using a DCB cable. The OP-8 and MC-4 Microcomposer were then patched together using patchcords via each of their patchbays. The transpose control on the OP-8 was able to transpose the synthesizer up or down by one octave.
DCB Equipped Synthesizers
- Roland Jupiter 8 The Jupiter 8 needed minor changes in its circuit for setting up with the OP-8. This work was carried out by Roland.
- Roland Juno 60 When using the OP-8 with a Roland Juno 60 the connection and operation were extremely easy, as only the CV and gate input jacks, and the transpose switch were relevant.
References
References
- Roland OP-8 Operation Manual
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about Roland OP-8 — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report