Restrictive flow orifice

Predicting Flow

Correlations assist in predicting the flow of a particular gas or gas mixture through a RFO. This is done by first determining the flow through the same RFO at the required pressure with a reference gas and then adjusting the specific gravity accordingly.

The pertinent equation for the reference gas of nitrogen (N2) is presented below.

Flow = \text{Flow Rate of N2 at the same pressure} * \sqrt{\frac{1}{\text{Specific Gravity}}}

Other applications

River flood control

In the natural environment, large orifice plates are used to control onward flow in flood relief dams. In these structures a low dam is placed across a river and in normal operation the water flows through the orifice plate unimpeded as the orifice is substantially larger than the normal flow cross section. However, in floods, the flow rate rises and floods out the orifice plate which can then only pass a flow determined by the physical dimensions of the orifice. Flow is then held back behind the low dam in a temporary reservoir which is slowly discharged through the orifice when the flood subsides.

Notes

References

1. [http://www.mathesongas.com/pdfs/products/Restrictive-Flow-Orifices.pdf Matheson, Restrictive Flow Orifice] accessed Sep 2011
2. [http://www.stanford.edu/dept/EHS/prod/researchlab/lab/tgo/valve/index.html RFO] [[Stanford]] accessed Sep 2011
3. Gas Flow Characterization of Restrictive Flow Orifice Devices, [[Sandia National Laboratories. Sandia]] REPORT SAND97-1670, Jul. 1997