Surf Wiki
Save to docs
general/decorative-arts

From Surf Wiki (app.surf) — the open knowledge base

Polishing

Rubbing a surface to make it smooth

Rubbing a surface to make it smooth

Polishing is the process of creating a smooth and shiny surface by rubbing it or by applying a chemical treatment, leaving a clean surface with a significant specular reflection (still limited by the index of refraction of the material according to the Fresnel equations). In some materials (such as metals, glasses, black or transparent stones), polishing is also able to reduce diffuse reflection to minimal values.

When an unpolished surface is magnified thousands of times, it usually looks like a succession of mountains and valleys. By repeated abrasion, those "mountains" are worn down until they are flat or just small "hills". The process of polishing with abrasives starts with a coarse grain size and gradually proceeds to the finer ones to efficiently flatten the surface imperfections and to obtain optimal results.

Mechanical properties

The strength of polished products can be higher than their unpolished counterparts owing to the removal of stress concentrations present in the rough surface during the polishing process. These concentrations take the form of corners and other defects, which magnify the local stress beyond the inherent strength of the material.

Types

Metalworking

Main article: Polishing (metalworking)

Other polishing processes include:

  • Burnishing
  • Mass finishing
    • Tumble finishing
    • Vibratory finishing
  • Sodablasting

Woodworking

  • French polishing
  • Wood finishing

Other

  • Chemical-mechanical polishing, which is used in semiconductor fabrication
  • Fabrication and testing of optical components
  • Flame polishing, a type of polishing used on glass and thermoplastics
  • Ultra-fine, abrasive paste polishing, polishing for soft or fragile work surfaces
  • Vapor polishing, a method of polishing plastics to optical clarity

References

References

  1. "Floor Scrubber".
  2. (2019). "Influence of finishing/polishing on the fatigue strength, surface topography, and roughness of an yttrium-stabilized tetragonal zirconia polycrystals subjected to grinding". Journal of the Mechanical Behavior of Biomedical Materials.
Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

decorative-arts grinding-and-lapping industrial-processes wood-finishing-techniques surface-finishing
Want to explore this topic further?

Ask Mako anything about Polishing — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report