From Surf Wiki (app.surf) — the open knowledge base
Petri TTL
| Field | Value |
|---|---|
| maker | Petri Camera Company |
| camera_name | Petri TTL |
| image | Petri TTL SLR camera front.jpg |
| caption | Petri TTL with Petri 55mm f/1:1.8 |
| type | 35 mm SLR |
| lens_mount | M42 |
| focus | Manual |
| frame-rate | Manual lever winding. |
| fsynch | 1/60 s |
| speedRange | ISO 25 to 1600 (DIN 15 to 33) |
| shutterRange | 1 s to 1/1000 s & 'B' |
| exposure | Manual |
| metering | EV3 to EV18 @ ASA 100 / DIN 21 |
| flash | Hot shoe, PC socket |
| battery | PX-625 |
| dimensions | 93 × 151 × 53 mm (house only) |
| weight | 700 g (housing only) |
| made_in | Japan |
| frame-rate = Manual lever winding. Petri TTL was a manual 35 mm SLR camera with TTL metering. It was built by Petri Camera Company, Japan, from 1974. It is unknown when the production stopped.
Features
The Petri TTL was a no-frills and very conservative camera. It was quite big and of heavy, all-metal construction. The only 'luxury' item found on the camera was a self-timer.
The camera was fully manual, with a built-in CdS light meter. The battery was only for the metering circuit. The user needed to push a button on the front of the camera to close the aperture, and then set the aperture ring on the lens to a value where the meter needle would fit inside a marker ring. After this, the user could let go of the button, and have full light in the viewfinder to compose the picture. On release of the shutter, the aperture would close to the correct setting.
As soon as the film was wound forwards, the light meter would switch on. It was not possible to switch it off manually, so the only way to conserve battery would be to delay advancing the film until the next exposure. It was not possible to attach a winder or motor to the camera.
The shutter was a horizontal cloth-curtain focal-plane shutter with a speed range of 1/1 to 1/1000 second. As it was fully mechanical, the camera could be used even if the battery was dead. Flash sync was set for 1/60 second.
The release button was placed in an uncommon spot, halfway down the front of the camera. If the user used the middle finger for the shutter release, it was possible to have an unusually solid grip on the housing.
For reasons unknown, it did not activate the self-timer: the timer had a separate release button that became available when the self-timer arm was cocked. Even with the self-timer ready, the camera could be used in the normal mode.
There were a wide range of lenses, bellows and other accessories available, both from Petri and from third-party producers.
File:Petri TTL SLR camera front (no lens).jpg|The camera housing alone. File:Petri TTL SLR camera top.jpg|The camera top. File:Petri TTL SLR camera bottom.jpg|Bottom plate. File:Petri TTL SLR camera back (open).jpg|Interior.
References
- Anonymous. "Petri TTL instruction book" ©Petri Camera Company, inc.
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about Petri TTL — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report