Surf Wiki
Save to docs
general/bulk-carriers

From Surf Wiki (app.surf) — the open knowledge base

Open hatch bulk carrier

Open hatch bulk carriers, often referred to as OHBCs or conbulkers, are specialized bulk carriers designed to offer direct access to the hold through cargo hatches which extend the full width of the vessel. As a result, large cargo units can be lowered into place. If it is possible, the holds or hatches are designed around standard cargo unit sizes. Sometimes gantry cranes are fitted. There is special attention for cargo-handling shipping gear.

These conbulkers are expensive because there is extra steel necessary to widen the hatches. This is crucial to provide strength. The open hatches are useful for forest products, such as pre-slung lumber (timber) and logs. The heavy units are more easy to handle than in a conventional bulk carrier.

The open hatch bulk carriers can also be used to carry containers on the outward leg, and dry bulk on the return leg. The first open hatch bulk carrier was built in 1962, for the use of paper trade.

OHBC types as forest product carriers

The Open Hatch Bulk Carriers hypernym generally refers to the following ship types:

; Woodchip carriers: These vessels are used for carrying large volumes of woodchips. Woodchips can only be stored within the watertight cargo holds. Some of the ships are fitted with gantry cranes and grab buckets, as well as wings with conveyor belts on deck, though shore-based pneumatic handling equipment is often used.

; Lumber (timber) carriers: [[File:Ship Inzhener Trubin.jpg|thumb|MS Inzhener Trubin, a timber carrier, 2013]] These ships are designed to carry packaged sawn lumber (timber), logs (bundled or loose), and other forest products. Lumber (timber) and logs are stored inside holds below the deck, and can also be stored on the main deck subject to safety restrictions. Therefore, the machinery spaces and accommodations of these vessels are usually located aft to provide a clear cargo deck area. They often have cranes that can lift up to 25 tonnes of logs.

; Wood pulp carriers: These vessels are designed for transport of wood pulp, the carriage of which requires the ship to comply with stringent requirements. Wood pulp are stored inside specially designed holds below the deck. Therefore, it is necessary that all holds are in top condition (clean, dry, no loose paint and no rust) and are generally fitted with dehumidification systems.

; Hybrid configuration (HyCon) bulk carriers: This design has been developed for the new generation, seeking for further safety and the improvement of cargo handling of bulk carrier, and is based on IACS Unified Rule for Bulk Carrier Safety. These vessels are double sides in the fore and aftmost holds, whereas the other holds remain single sided. Double sides reduce the possibility of damage to areas that require additional strengthening without greatly increasing the lightship weight.

References

References

  1. "Bulk carrier types: Ore carriers, OBO ships, Self unloader, Forest product carriers & more".
  2. "Woodchip Carrier".
  3. "Lumber carrier". Wärtsilä.
  4. Ajay Menon. (2021-07-13). "Understanding Lumber Carrier Vessels".
Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

bulk-carriers ship-types
Want to explore this topic further?

Ask Mako anything about Open hatch bulk carrier — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report