Surf Wiki
Save to docs
general/mirrors

From Surf Wiki (app.surf) — the open knowledge base

Mirror support cell

In astronomy, a mirror support cell - more commonly mirror cell - is a component of a reflecting telescope that supports the mirror in place to hold optical alignment, allow collimation adjustment, and protect it from falling out. The common usage of the word denotes the cell that holds the primary mirror (M1), however technically it could also be used to denote the support assembly (usually called a spider or strut) for the secondary mirror (M2) or other mirrors.

Overview

Basic cells

A basic mirror cell can be built using minimal calculation and simple materials.{{cite book |last=Pierce| first=J. M. | author-link=John M. Pierce |editor-first=Albert G.| editor-last=Ingalls |editor-link=Albert Graham Ingalls

Cells for more sophisticated "small" telescopes

Telescope makers seeking to build larger "small" telescopes with thinner mirrors find simple designs inadequate so they must resort to more complex design methods which include possible use of multiaxis adjustment potential and floating whippletree cell design, often optimimized using computer aided design programs. There remains a good deal of discussion in the amateur telescope making community over the use of glue and the addition of simple astatic devices in such cells.

Cells for large telescopes

Astronomical observatories require a much heavier and more complex mirror support cell. One notable example of the structure needed for such telescopes is the dual cell for the M1 mirrors of the 8.4 meter Large Binocular Telescope at Mount Graham International Observatory. This is a multiple beam and truss system which in turn supports a temperature maintenance and air flow system, six position actuators and the 160 pneumatic actuators which work its active optics system. This results in a huge assembly structure weighing about 28 tons without its mirrors. Such a mirror cell requires multiple mathematical steps of finite element analysis of its deformation under static and moving loading.

Notes

References

  1. [http://star.arm.ac.uk/history/instruments/Grubb-15inch.html] Grubb 15 inch support cell built in 1835
  2. Holm, Mark. "Mirror Cells for Amateur Telescope Makers".
  3. Kriege, David. (June 1997). "The Dobsonian Telescope, A Practical Manual for Building Large Aperture Telescopes". Willmann-Bell.
  4. Miglietta, L.. (1996). "The Final Design of the Large Binocular Telescope M1 Mirror Cells". Proceedings of SPIE conference on Optical Telescopes of Today and Tomorrow, 2871, (1996).
  5. (1995). "UA-95-02: Mirror Support System for Large Honeycomb Mirrors". University of Arizona.
Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

mirrors optical-telescope-components
Want to explore this topic further?

Ask Mako anything about Mirror support cell — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report