Skip to content
Surf Wiki
Save to docs
general/lotus-racing-cars

From Surf Wiki (app.surf) — the open knowledge base

Lotus Mark IX

Aluminium-bodied sports racing car

Lotus Mark IX

Aluminium-bodied sports racing car

FieldValue
image1955LotusMk9andLotus6.jpg
caption1954 Lotus Mark IX, Coventry Climax 1098 cc
beside a Lotus Mark VI
nameLotus Mark IX
manufacturerLotus Cars
production1954–1955
predecessorLotus Mark VIII
successorLotus Eleven
classSports racing car
platformTubular space frame
layoutFront engine, rear drive
body_styleRoadster
engineCoventry Climax 1098 cc
transmissionManual 4-speed (MGTF)
wheelbase7 ft
length11 ft
width4 ft
height2 ft
weight1,080 lb
relatedLotus Mark VI
designerColin Chapman

beside a Lotus Mark VI

The Lotus Mark IX (1955) was an aluminium-bodied sports racing car manufactured by Lotus Engineering Ltd. About thirty of the Mark IX sports racing cars were made. It was closely related to the Lotus model Mark VIII (1954), of which only about seven cars were made. These cars were largely based on the innovative space frame of the Lotus Mark VI (1952). The highly aerodynamic bodies were designed by Frank Costin and constructed by Williams & Pritchard Limited.

During this early era, of 1954–1955, Lotus Engineering was still a fledgling company, and cars were delivered in different states of completion on special orders. Similar to the Mark VIII, the Mark IX was available in various configurations and different engines, including the 1500 cc MG, 1500 cc Connaught and 2-litre Bristol were fitted. However, the Mark IX designation is most often powered by the 1100 cc Coventry Climax engine. Apparently, two models of Mark IX were offered – the "Club" and the "Le Mans", the latter of which had larger drum brakes fitted.

Lotus IX at a modern vintage race

The chassis of the Mark IX was a new design, compared to that of the Mark VIII. Both were space frames of brazed steel tube. The new chassis was an advance over the Mark VIII in terms of the efficiency of its design and avoiding the VIII's need for diaphragm-stiffening panels. However, both chassis still used an oversized lower rail of 1.8 in tube, a hang-over from the original design of the first Mark VI space frame.{{Cite book

A total of about thirty of the Mark IX sports racing cars were produced in various forms, and these were successfully raced in both Europe and the US. The first two examples of the Mark IX were apparently delivered to the US with the 1100 cc Coventry Climax engine to compete in the 1955 running of the 12 Hours of Sebring race and were beaten by a Porsche Spyder. These cars were actually entered as Lotus Mark VIII models in the G class by Frank Miller of Larchmont, NY and by Bobby Burns and Norman J. Scott of Houston TX in, respectively, car numbers 78 and 79. The Lotus Works Team entered at least one Mark IX in the Le Mans 24 hour race in 1955, driven by Chapman, which may have been equipped with disc brakes. However, the car was disqualified apparently due to his reversing the car to re-enter the race track after going off course.

References

References

  1. [https://www.motorsportmagazine.com/archive/article/may-2003/79/x-ray-spec-lotus-mkix/?v=c2f3f489a005 Lotus Mk IX], Motorsport Magazine, pages 79–82, May 2003.
Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

Want to explore this topic further?

Ask Mako anything about Lotus Mark IX — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report