Skip to content
Surf Wiki
Save to docs
general/bows-archery

From Surf Wiki (app.surf) — the open knowledge base

Laminated bow

Type of archery bow


Type of archery bow

A laminated bow is an archery bow in which different materials are laminated together to form the bow stave itself. Traditional composite bows are normally not included, although their construction with horn, wood, and sinew might bring them within the above definition.

History

The Egyptians, Scythians and Assyrians had been making laminate bows out of combinations of wood, horn and sinew as early as the 2nd millennium BCE.

The oldest known laminated bows (made entirely of wood) belong to the Scythian cultures. A Scythian wood-laminate bow was discovered in the 19th century in Ukraine and is currently held at the Institute of Archaeology. It was constructed by laminating several fine strips of willow and alder wood, bound with fish glue and wrapped in birch bark. It had a double-curved shape, was 32 in long and may have been capable of shooting arrows at distances of over 500 yd.

In 2006, an international expedition to the Altai Mountains region in western Mongolia uncovered a laminate bow, associated with the Scythian Pazyryk culture. It is of a complicated construction, with many fine strips of wood glued side-by-side, and a wooden reinforcement plate glued to the handle. The entire bow was wrapped in spiral form with rawhide and birch bark; in addition to reinforcing the construction this also made the bow resistant to water and humidity. The bow is dated to the 3rd century BCE.

The modern Japanese yumi is a laminated bow. Laminated bows in Japan first appeared around 1000 CE, during the late Heian or Kamakura period. They were made of wood and bamboo laminated with glue, evolving from simple bamboo-backed bows to complex bows of five piece construction (higo yumi) by the 1600s. The Sámi and their neighbours across northern Eurasia also made laminated bows for centuries. Hejaz Arabs may also have used a laminated bow.

Reading Museum is in the possession of an Inuit-made laminate bow. It was made in the Pelly Bay area of Nunavut, Canada, and consists of three shims of bone laminated near the handle region, and reinforced at the joints with rawhide. It has two short driftwood arrows with bone points. They reflect the shortage of wood in the Arctic region and the improvisation of pre-contact indigenous Inuit.

References

References

  1. (2002). "The two-wood bow". Acta Borealia.
  2. (1996). "The National Geographic Magazine, Volume 190". National Geographic Society.
  3. (2008). "Das skythenzeitliche kriegergrab aus Olon-Kurin-Gol Neue Entdechungen in der Permafrostzone des mongolischen Altaj". Eurasia Antiqua.
  4. (2010). "Martial Arts of the World: An Encyclopedia of History and Innovation". ABC-CLIO.
  5. [http://taylorandfrancis.metapress.com/content/ct07yrml6fcbanuj/ Ragnar Insulander. The Two-Wood Bow.], ''[[Acta Borealia]]'' 2002; 19: 49-73 {{dead link. (December 2017)
  6. [https://www.jstor.org/stable/1005699 The Neolithic Age in Eastern Siberia. Henry N. Michael. Transactions of the American Philosophical Society, New Ser., Vol. 48, No. 2 (1958), pp. 1-108. ] {{doi. 10.2307/1005699
  7. Arab Archery. An Arabic manuscript of about A.D. 1500 "A book on the excellence of the bow & arrow" and the description thereof. Translated and edited by Nabih Amin Faris and Robert Potter Elmer. Princeton University Press, 1945.
  8. "Inuit bow and arrows".
Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

Want to explore this topic further?

Ask Mako anything about Laminated bow — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report