From Surf Wiki (app.surf) — the open knowledge base

Lamborghini V10

Field	Value
name	Lamborghini V10
image	SC06 2005 Lamborghini Gallardo engine.jpg
caption	Lamborghini V10 engine in a Lamborghini Gallardo
manufacturer	Audi &
Automobili Lamborghini S.p.A. (Volkswagen Group)
configuration	90° V10 petrol engine
production	2003–2024
displacement	4961 cc,
5204 cc
bore	5.0 L: 82.5 mm,
5.2 L: 84.5 mm
stroke	92.8 mm
block	Cast aluminium alloy
head	Cast aluminium alloy
valvetrain	4-valves per cylinder,
double overhead camshaft
fuelsystem	5.0 L: Electronic multi-point sequential fuel injection
5.2 L: Electronic multi-point Fuel Stratified Injection
fueltype	Petrol/Gasoline
oilsystem	Dry sump
coolingsystem	Water cooled
power	5.0 L: 368 -
5.2 L: 412 - at 8,250 rpm
specpower	5.0 L: 78.6 kW per litre
5.2 L: 86.3 kW per litre
torque	5.0 L: 510 Nm
5.2 L: 560-601 Nm at 6,500 rpm
compression	5.0 L: 11.5:1
5.2 L: 12.5:1
predecessor	Lamborghini V8 (indirect)
successor	Lamborghini L411 (for Temerario)

Automobili Lamborghini S.p.A. (Volkswagen Group) 5204 cc 5.2 L: 84.5 mm double overhead camshaft 5.2 L: Electronic multi-point Fuel Stratified Injection 5.2 L: 412 - at 8,250 rpm 5.2 L: 86.3 kW per litre 5.2 L: 560-601 Nm at 6,500 rpm 5.2 L: 12.5:1

The Lamborghini V10 is a ninety degree (90°) V10 petrol engine which was developed for the Lamborghini Gallardo automobile, first sold in 2003.

Developed by Lamborghini, for use in the Gallardo, and the first engine developed for Lamborghini after they were acquired by Audi – part of the Volkswagen Group.

This engine has its origins in two concept cars made by Lamborghini, the 1988 P140 and the 1995 Calà. Both were equipped with engines having a 3.9-litre displacement. In the early 2000s, Lamborghini resumed the project and the engine was redesigned by increasing its displacement.

The crankcase and engine block are built at the Audi Hungaria Zrt. factory in Győr, Hungary, whilst final assembly is carried out at Sant'Agata Bolognese, Italy. The engine has a 90° V angle and, unusually for a production engine, a dry sump lubrication system is utilised to keep the center of gravity of the engine low.

There was also some speculation that the engine block of the original 5.0-litre Lamborghini V10 was closely based on the Audi 4.2 FSI V8, which Audi produces for its luxury cars. However, this was denied by Audi, in their official documentation for their 5.2 FSI V10 engine, as used in the Audi S6 and Audi S8 – the Lamborghini 5.0 V10 has a cylinder bore spacing of 88 mm between centres, whereas the Audi 5.2 V10 cylinder bore spacing is 90 mm, the same as the Audi 4.2 FSI V8. The cylinder heads use the four valves per cylinder layout favoured by the Italian firm, rather than the five valve per cylinder variation formerly favoured by the German members of Volkswagen Group – including Audi and Volkswagen Passenger Cars. It was later confirmed that the new 5.2-litre Lamborghini V10 is mechanically identical to the Audi 5.2 V10 engine, as is evident by Lamborghini's usage of Audi's Fuel Stratified Injection, and 90 mm cylinder spacing.

Specifications

;engine configuration: 90° V10 engine; dry sump lubrication system ;engine displacement etc. :5.0 — 4961 cc; bore x stroke: 82.5 x. Rod length is 154mm. (Rod/stroke ratio:1.65), 496.1 cc per cylinder; compression ratio: 11.5:1 :5.2 — 5204 cc; bore x stroke: 84.5 x. Rod length is 154mm. (Rod/stroke ratio:1.65), 520.4 cc per cylinder; compression ratio: 12.5:1 ;cylinder block and crankcase :5.0 — cast aluminium alloy with integrated liners with eutectic alloy; 88 mm cylinder bore spacing; forged steel crankshaft with 18° split crankpins to create even 72° firing intervals :5.2 — cast aluminium alloy; 90 mm cylinder bore spacing; forged steel crankshaft with non-split crankpins creating uneven firing intervals of 90° and 54° ;cylinder heads and valvetrain: cast aluminium alloy, four valves per cylinder, 40 valves total, low-friction roller cam followers with automatic hydraulic valve clearance compensation, chain driven double overhead camshafts, continuously variable valve timing system both for intake and exhaust ;aspiration: two air filters, two hot-film air mass meters, two cast alloy throttle bodies each with electronically controlled throttle valves, cast magnesium alloy variable geometry and resonance intake manifold ;fuel system :5.0 — two linked common rail fuel distributor rails, electronic sequential multi-point indirect fuel injection with 10 intake manifold-sited fuel injectors :5.2 — fully demand-controlled and returnless; fuel tank mounted low pressure fuel pump, Fuel Stratified Injection (FSI): two inlet camshaft double-cam driven single-piston high-pressure injection pumps maintaining pressure in the two stainless steel common rail fuel distributor rails, ten combustion chamber sited direct injection solenoid-controlled sequential fuel injectors ;ignition system and engine management: mapped direct ignition with centrally mounted spark plugs and ten individual direct-acting single spark coils; two Lamborghini LIE electronic engine control unit (ECUs) working on the 'master and slave' concept due to the high revving nature of the engine ;exhaust system :5.0 — five-into-one exhaust manifolds for each cylinder bank :5.2 — 2-1-2 branch exhaust manifold per cylinder bank to minimise reverse pulsation of expelled exhaust gasses ;5.0 power and torque outputs and applications : 368 kW at 7,800 rpm; 510 Nm at 4,500 rpm (80% available from 1,500 rpm) — Gallardo 2003-2005 : 382 kW at 8,000 rpm; 510 Nm at 4,250 rpm — Gallardo SE, Spyder, and 2006-2008 : 390 kW at 8,000 rpm; 510 Nm at 4,250 rpm — Gallardo Superleggera ;5.2 power and torque outputs and applications : 224 kW at 7,000 rpm; 400 Nm at 6,500 rpm — Gallardo Super GT - 2008-2009 : 404.5 kW at 8,000 rpm; 540 Nm at 6,500 rpm — Gallardo LP550/2, Balboni, Spyder, Bicolore, AD Personam, Singapore Limited Edition, Super Trofeo, Tricolore, Hong Kong 20th Anniversary Edition, Malaysia Limited Edition, India Serie Speciale, Indonesia Limited Edition, Edizione Tecnica - 2010-2013 : 412 kW at 8,000 rpm; 540 Nm at 6,500 rpm — Gallardo LP560/4, LP560/4 Spyder, Polizia, Gold Edition, Bicolore, LP560/4 Noctis, LP560/4 Bianco Rosso, Super Trofeo, LP560/4 GT, Reiter Extenso, Edizione Tecnica, LP560/2 50° Anniversario - 2008-2013 : 419 kW at 8,000 rpm; 540 Nm at 6,500 rpm — Gallardo LP570/4 SuperLeggera, Spyder Performante, Edizione Tecnica, SuperLeggera Nero Nemesis, SuperLeggera Bianco Canopus, Super Trofeo Stradale, Squadra Corse, Macau GP Edition - 2010-2013 : 441 kW at 8,000 rpm; 540 Nm at 6,500 rpm — Gallardo GT3 : 449 kW at 8,250 rpm; 560 Nm at 6,500 rpm — Huracán LP610/4 coupé and spyder - 2014-2019 : 426.5 kW at 8,000 rpm; 540 Nm at 6,500 rpm — Huracán LP580/2 coupé and spyder - 2016-present : 456 kW at 8,250 rpm; 570 Nm at 6,500 rpm — Huracán LP620/2 Super Trofeo, GT3, Super Trofeo Evo - 2014-present : 471 kW at 8,000 rpm; 600 Nm at 6,500 rpm — Huracán LP640/4 Performaté coupé and spyder - 2017-present : 471 kW at 8,000 rpm; 600 Nm at 6,500 rpm — Huracán LP640/4 Evo coupé and spyder - 2019-present

Vehicles

As of 2019, all V10s in the Lamborghini lineup after the first generation Gallardo use the 5.2-litre variant. They are:

Lamborghini

Gallardo LP 550–2
Gallardo LP 550-2 Spyder
Gallardo LP 560–4
Gallardo LP 560-4 Spyder
Gallardo LP 570-4 Superleggera Edizione Technica
Gallardo LP 570-4 Spyder Performante Edizone Technica
Gallardo LP 570-4 Squadra Corse
Gallardo LP 550-2 Bicolore
Gallardo LP 550-2 Tricolore
Gallardo LP 570-4 Super Trofeo Stradale
Gallardo GT3-R
Gallardo LP 600 GT3
Sesto Elemento
Egoista
Huracán LP 610-4 Avio
Huracán LP 580–2
Huracán LP 580-2 Spyder
Huracán LP 610-4 Spyder
Huracán LP 610–4
Huracán LP 620-2 Super Trofeo
Huracán GT3
Huracán Super Trofeo Evo
Huracán Super Trofeo Omologata
Huracán LP 640-4 Performante
Huracán LP 640-4 Performante Spyder
Huracán LP 640-4 Evo
Huracán LP 610-2 Evo RWD
Huracán Sterrato
Huracán Tecnica
Huracán GT3 Evo
Asterion LPI 910–4
Urus Concept

Audi

R8 V10
S8 D3
S6 C6
RS 6 C6

(The Lamborghini V10 has also had a placement in the Audi R8, RS6, S8 and S6. The 5.2 V10 used in the S6 and S8 is different in several important aspects, namely a less robust crankshaft with a split pin design, cast aluminum pistons, and a traditional wet-sump oiling system, as well as differences in the valvetrain - all of which, combined, result in the much higher RPM red line and specific power output of the Gallardo and R8)

Italdesign

Zerouno
Zerouno Duerta

References

"Lamborghini Cars full specifications - First spyshots of the Lamborghini L140 model". LamboCars.com.
Enright, Andy. (27 February 2007). "Conversation: Lamborghini CEO Stephan Winkelmann - Italian style, German quality". [[Edmunds (company).
(June 2006). "Audi 5.2 litre V10 FSI engine". [[Audi.
Barker, John. (5 April 2009). "Audi R8 v Lamborghini Gallardo LP560-4". Autovia.
Simister, John. (7 March 2008). "Lamborghini Gallardo LP560-4 - New Gallardo V10 bends design rules". Autovia.
Taylor, Michael. (26 February 2008). "Lamborghini gives Gallardo bigger engine, new name". [[Hearst Communications]].
(2008). "Katalog der Automobil Revue". Motorbuch Verlag.
"Lamborghini Models".
"Audi New Technology 2009 – 2010". Audi of America.

Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

lamborghini-engines gasoline-engines-by-model v10-engines

Want to explore this topic further?

Ask Mako anything about Lamborghini V10 — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report