Skip to content
Surf Wiki
Save to docs
geography/china

From Surf Wiki (app.surf) — the open knowledge base

Laboratory Cabin Module

Laboratory Cabin Module

FieldValue
moduleLaboratory Cabin Module
module_imageTiangong 2 space laboratory model.jpg
module_image_size300px
module_image_captionA model of Tiangong-2, the prototype for the LCMs
launch24 July 2022: Wentian
31 October 2022: Mengtian
launch_vehicleLong March 5B
mass~21,500 kg
(dry mass of each LCM)
length17.9 m
diameter4.2 m

31 October 2022: Mengtian (dry mass of each LCM)

The Laboratory Cabin Modules (LCM) () are components of the Tiangong space station. Based on the Tiangong-2 experimental space module, the LCMs complete the third and final stage of Project 921, the CNSA's program to establish a permanent Chinese space station. While China's small uncrewed spacecraft can provide platforms for zero gravity and exposure to space for scientific research, the LCMs offer a long term environment combined with ready access by human researchers over periods that far exceed the capabilities of Shenzhou spacecraft. Operations are controlled from the Beijing Aerospace Command and Control Center in China.

The first LCM, Wentian (), was launched into orbit on 24 July 2022. The second LCM, Mengtian ({{zh|s=梦天|t=夢天|p=Mèng Tiān|l=Dreaming of the Heavens

Purpose

Main article: Wentian module, Mengtian module

Diagram of the ''Wentian'' module
Diagram of the ''Mengtian'' module

The first laboratory module provides additional navigation avionics, propulsion and orientation control as backup functions for the Tianhe core module (TCM). Both LCMs provide a pressurized environment for researchers to conduct science experiments in freefall or zero gravity which could not be conducted on Earth for more than a few minutes. Experiments can also be placed on the outside of the modules, for exposure to the space environment, cosmic rays, vacuum, and solar winds.

The axial ports of the LCMs are fitted with rendezvous equipment, and each first docked to the axial port of the CCM. A mechanical arm dubbed the Indexing Robotic Arm, somewhat like the Lyappa arm used on the Mir space station, moved Wentian to a starboard-side port and Mengtian to a port-side port of the CCM. It is different from Lyappa as it works on a different mechanism. Lyappa arm is needed to control the pitch of the spacecraft and redocking in a different plane. But the Indexing Robotic Arm is used when docking is needed in the same plane. In addition to this arm used for docking relocation, the Chinarm on Tianhe module can also be used as a backup in place of Indexing Robotic Arm.

Indexing Robot Arm on Wentian

Wentian was successfully relocated to the starboard port on 30 September 2022 at 04:44 UTC using the indexing robot arm.

In addition to this, Wentian houses a small 5 m long robotic arm like the Chinarm as a supplemental to that arm. It is used for manipulating extravehicular payloads and their positioning accuracy is 5 times better than the Chinarm. There are standard adapters (silver squares) on the modules to host the payloads. There is also an adapter by which one of these arms can be grappled by the Chinarm it to work a single robotic arm like Orbiter Servicing Arm with Canadarms.

Mengtian also carries a toolbox equipped with a dexterous robotic arm (similar to the Lyappa arm used on the Mir space station) installed to assist in cargo transfer and payload release, and can be used to deploy external payloads.

Electrical power is provided by two steerable solar power arrays, which use photovoltaic cells to convert sunlight into electricity. Energy is stored to power the station when it passes into the Earth's shadow. Resupply ships will replenish fuel for LCM 1 for station-keeping, to counter the effects of atmospheric drag.

Dimensions

The length of each module is 17.9 m. They are cylindrical with a maximum diameter of 4.2 m and an on-orbit mass of approximately 20,000 kg apiece.

Launch

Both modules were launched in 2022 on Long March 5B launch vehicles from Wenchang Satellite Launch Center. Wentian was launched on 24 July 2022, while Mengtian was launched on 31 October 2022. They were inserted into a low Earth orbit with an average altitude of 393 km at an orbital inclination of 42 degrees, centered in the Earth's thermosphere.

References

References

  1. (2018-04-26). "Planned space station details made public". [[China Daily]].
  2. Jones, Andrew. (31 May 2022). "Rocket to launch China's next space station module arrives at launch center". [[SpaceNews]].
  3. (April 28, 2021). "China readies launch of Tianhe module, start of ambitious two-year station construction effort".
  4. Hong Yang. (2020). "Manned Spacecraft Technologies". Springer.
  5. (April 28, 2021). "China readies launch of Tianhe module, start of ambitious two-year station construction effort".
  6. "我国成功实施问天实验舱转位". 科学新闻网.
  7. "Wentian is 17.7m long and its dry mass is ~21500kg. With additional 1550kg propellant, the launch mass will be more than 23 tonnes.".
  8. "An illustration of the China Space Station core module robotic arm with the laboratory module arm connected at the end.".
  9. Beil, Adrian. (30 October 2022). "China launches Mengtian science module to Tiangong space station". [[NASASpaceFlight]].
  10. Xinhua. (31 October 2022). "China launches lab module Mengtian as space station approaches completion".
  11. (2021). "天宫空间站关键技术特点综述". 中国科学: 技术科学.
  12. Barbosa, Rui C.. (1 March 2021). "China preparing to build Tiangong station in 2021, complete by 2022".
  13. David, Leonard. (7 March 2011). "China Details Ambitious Space Station Goals". [[Space.com]].
Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

Want to explore this topic further?

Ask Mako anything about Laboratory Cabin Module — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report