Skip to content
Surf Wiki
Save to docs
general/fjords-of-alaska

From Surf Wiki (app.surf) — the open knowledge base

Icy Bay (Alaska)

Body of water in Yakutat borough, Alaska, US

Icy Bay (Alaska)

Body of water in Yakutat borough, Alaska, US

FieldValue
nameIcy Bay
native_nametli
imageIcybay2.jpg
image_size250px
captionGlaciers at Icy Bay
locationYakutat, Alaska
coordinates
typeFjord
oceansPacific Ocean
catchment
date-built
date-flooded
lengthwidth =area =
depthmax-depth=volume=
shoreelevation =
temperature_hightemperature_low =
pushpin_mapAlaska
pushpin_map_captionLocation in Alaska

|date-built = |date-flooded= Icy Bay (Tlingit: Lig̲aasi Áa) is a body of water in the borough of Yakutat, Alaska, formed in the last 100 years by the rapid retreat of the Guyot, Yahtse, and Tyndall Glaciers. It is part of the Wrangell-Saint Elias Wilderness.

At the beginning of the 20th century, the bay entrance was permanently blocked by a giant tidewater glacier face that calved icebergs directly into the Gulf of Alaska. A century-long glacial retreat has opened a multi-armed bay more than 30 mi long.

Icy Bay is a popular destination for sea kayakers, and is reachable by bush plane from Yakutat, Alaska.

2015 landslide and megatsunami

At 8:19 p.m. Alaska Daylight Time on October 17, 2015, the side of a mountain collapsed on the western end of the head of Taan Fiord, a finger of Icy Bay formed by the retreat of Tyndall Glacier. The resulting landslide generated a megatsunami in Taan Fjord. The area is uninhabited and no one was visiting it at the time, and the event went undetected for several hours until its signature was noted as a 4.9 magnitude event

Scientists visited the fjord in the spring and summer of 2016 to gather data on the event. and lasted 60 to 100 seconds, where it dislodged another 100,000,000 m3 of material from the bottom of the fjord. Some of the landslide's debris traversed the 90 m water at the head of the fjord and then climbed 105 m to reach a final resting place at an elevation of about 15 m on the opposite shore. Altogether, the landslide debris covered 2 km2.

sp=us}}.

The landslide generated a megatsunami with an initial height of about 100 m that struck the opposite shore of the fjord, with a run-up height (i.e., the maximum height on land the megatsunami reached as it ran up the shore) of 193 m. At a speed of up to 60 mph, the megatsunami then continued down the entire length of the fjord – about 15 km – and into Icy Bay. In the uppermost 1.5 km of the fjord, run-up exceeded 100 m along the shore, and run-up heights in the upper part of the fjord otherwise varied between 70 and on the southeast shore and 30 and on the northwest side. In the middle part of the fjord, run-up heights varied greatly, dropping to as low as 3 to in some places but reaching 40 to in others. In the lower fjord, run-up heights on both sides were 15 to, increasing to 20 to at the entrance to the fjord. Along its path, the wave inundated an overall area of 20 km2 and left a trim line at its run-up height, stripping away all vegetation, including alder forests, and leaving behind barren beaches that reached elevations of 150 ft.

The wave may have been about 40 ft tall when it entered Icy Bay itself about 12 minutes after the landslide, and it inundated the bay's coastline with run-up levels of as much as 4 to in some places, although the run-up diminished to below the normal high-tide level in Icy Bay at distances greater than 5 km from the mouth of Taan Fiord. When it reached the nearest tide gauge, located 140 km to the southeast of the landslide near Yakutat, Alaska, the wave had diminished to a height of 15 cm.

The Taan Fiord event bore a strong similarity to the July 1958 landslide and megatsunami in Alaska's Lituya Bay. The megatsunami was the largest known marine tsunami worldwide since the Lituya Bay wave; although the Taan Fiord landslide was larger than the one at Lituya Bay, the Lituya Bay wave was larger than the one in Taan Fiord because the landslide in Taan Fiord did not fall from as great a height and landed in shallower water. The Taan Fiord wave also was the fourth-largest megatsunami of any type over the previous 100 years, with the fourth-highest run-up ever recorded anywhere in the world. Scientists assessed the landslide occurred because the 17 km retreat of Tyndall Glacier between 1961 and 1991 had left the mountainside unsupported by what had once been about 400 m of glacial ice. They also noted that heavy rains may have weakened the mountainside further, and that seismic waves from a 4.1-magnitude earthquake centered about 500 km away arrived two minutes before the landside began and may also have contributed to the event.

References

References

  1. (September 2018). "The 2015 Landslide and Tsunami in Taan Fiord, Alaska".
  2. Bretwood, Higman. (September 6, 2018). "The 2015 landslide and tsunami in Taan Fiord, Alaska". nature.com.
  3. "Taan Fjord Landslide and Tsunami". National Park Service.
  4. Rozell, Ned. (April 7, 2016). "The giant wave of Icy Bay".
  5. Morford, Stacy. (December 18, 2015). "Detecting Landslides from a Few Seismic Wiggles".
  6. Stolz, Kit. (March 17, 2017). "Why Scientists Are Worried About a Landslide No One Saw or Heard".
  7. Petley, Dave. (January 2, 2016). "The Tyndall Glacier landslide in Alaska: the largest recorded non-volcanic landslide in North America".
  8. Knutsen, Ashleen. (August 21, 2017). "The Alaskan tsunami that created waves as high as Seattle's Space Needle".
Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

Want to explore this topic further?

Ask Mako anything about Icy Bay (Alaska) — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report