Skip to content
Surf Wiki
Save to docs
general/honda-motorcycles

From Surf Wiki (app.surf) — the open knowledge base

Honda SS125A

Motorcycle manufactured by Honda from 1967 through 1969

Honda SS125A

Summary

Motorcycle manufactured by Honda from 1967 through 1969

FieldValue
nameHonda SS125
image1969 Honda SS125 right side.jpg
caption1969 Honda SS125
manufacturerHonda
production1967–1969
assemblyJapan
predecessorHonda CS125
successorHonda CB125, CB125K
classStandard
engine124 cc air-cooled SOHC parallel twin
bore_stroke44 ×
compression9.4:1
power13 PS @ 10,000 or 10,500 rpm
ignitionSix volt points
transmission4-speed manual
framePressed steel "T-bone" type frame
suspension
brakesSingle leading shoe drum front and rear
tires
dry_weight105 kg
fuel_capacity8.2 L
oil_capacity1.2 L

The Honda SS125A is a motorcycle manufactured by Honda from 1967 through 1969.

The SS125A was based on the Japan-only Honda CS125 along with two other variants, the CD125 and the CL125A, all three of which shared many common components with the CS125. The larger capacity CD175 was also similar in design, up to 1969, although with a more touring-oriented styling.

Although the variants shared common components, many were unique to this range and, combined with the relatively short production run, can make spare parts difficult to obtain today. Certain items, such as silencers (mufflers) for the low slung exhaust are very rare and command a premium when sold.

In spite of its stylish appearance, the motorcycle was criticised for lack of performance, and was effectively superseded by the CB125 in 1971.

Specification

1969 Honda SS125 "sloper" engine

The SS125A had 17 inch wheels; the front rim was either 1.4 inches or 1.6 inches wide while the rear rim was 1.6 inches wide. The 124 cc twin cylinder engine was basically same as the earlier CA95/CB92 layout, using the left side of the engine for the timing chain to the camshaft. It used a Keihin Seiki vacuum carburetor, as opposed to the earlier engines, which were equipped with a slide valve type. The home market (Japan) version was built using a 180 degree crankshaft, as opposed to the 360 degree layout in the U.S.models.

Notes

References

  1. [http://classic-motorbikes.net/gallery~Honda-SS125 "The Honda Ss125 Gallery"] {{Webarchive. link. (2010-01-11 , ''Classic Motorbikes''.)
  2. "Interview: Denny Berg". Garagista Media.
  3. Silver, Bill. (March 2013). "Guide to 125-250cc Honda Street Twins". Ogden Publications.
  4. Mitchel, Doug. (2005). ["Honda Motorcycles: Everything You Need to Know About Every Honda Motorcycle Ever Built"]({{Google books). KP Books.
  5. (1972). "Shop manual Honda 125 175". Honda Motor Co., Ltd.
  6. (1968). "Honda 125 Model CD125 CD125A SS125A CL125A Owner's Manual". Honda Motor Co., Ltd.
Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

Want to explore this topic further?

Ask Mako anything about Honda SS125A — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report