From Surf Wiki (app.surf) — the open knowledge base
Ford Sigma engine
| Field | Value |
|---|---|
| name | Ford Sigma engine |
| image | Ford Zetec-S 1.6 16V engine.jpg |
| manufacturer | Ford Motor Company, Yamaha Motor Company |
| aka | |
| production | 1995–present |
| predecessor | CVH Engine |
| Valencia-HCS engine | |
| successor | Ford EcoBoost engine |
| configuration | I4 |
| displacement | |
| bore | |
| stroke | |
| emissions control | Close-coupled, closed loop, three-way catalyst with oxygen sensor |
| emissions level | Euro 4, Euro 5 |
| weight | 81 kg (1.6 L Zetec) |
| 90 kg (1.6 L Duratec) | |
| block | aluminium |
| head | aluminium |
| valvetrain | SOHC 2 valves x cyl. |
| DOHC 4 valves x cyl. w/Ti-VCT | |
| supercharger | On 2002 1.0-litre Ford Fiesta |
| fuelsystem | Electronic fuel injection |
| Sequential multi-port FI | |
| management | PCM, Siemens |
| fueltype | gasoline |
| oilsystem | Pressure-fed with full flow oil filter |
| coolingsystem | Water-cooled |
| power | 60–155 PS |
| torque | 109–162 Nm |
| compression | 10.0:1, 10.3:1, 11.0:1, 11.8:1 |
Valencia-HCS engine 90 kg (1.6 L Duratec) DOHC 4 valves x cyl. w/Ti-VCT Sequential multi-port FI
The Ford Sigma is a small straight four automobile engine introduced in 1995 by Ford Motor Company. Its first evolution was sold as the Zetec-S (not to be confused with the trim level), then Zetec-SE and finally, in later years, renamed Duratec. The last upgrade of the engine is named Duratec Ti-VCT. Conceived for Ford's smaller models, the motor was intended to replace the older HCS (a derivative of the even older Kent unit) and smaller capacity CVH units.
Introduction and production
As with the SHO V6 engine, development of the Zetec-S was a collaborative effort between Ford, Mazda and Yamaha. The engine's sound profile was refined in Ford's acoustics center in Cologne-Merkenich, Germany. Production of the Zetec-SE was carried out in the Ford Valencia Engine Plant, with Yamaha building the 1.7 L engine blocks in Japan.
When the Zetec-SE debuted in 1995, it included many firsts, including a plastic inlet manifold, a "ladder" style main bearing and crankcase assembly, and big-end bearing caps which are forged in one piece and subsequently split. It also incorporates powder metal connecting rods, which were quite exotic at the time. This feature makes the engine more challenging to rebuild at the end of its working life, since it is not possible to re-machine the bearing ladder as is done with a conventional cylinder block — the entire assembly has to be renewed. Despite this, engine tuners have found novel ways to increase the power of the unit through use of different valves and increasing the compression ratio of the engine through skimming of the cylinder head.
The engine first appeared in the Mk4 Ford Fiesta and the virtually identical Mazda 121 in 1242 cc capacity, with 1388 cc, 1596 cc and 1679 cc derivatives coming later.
Difference between Zetec-SE/Zetec-S/Duratec/Duratec Ti-VCT
File:Zetec SE 125 1.jpg|1.25-litre Duratec engine in a 2009 Ford Fiesta File:Ford Zetec-S 1.7 engine.JPG|1.7-litre Zetec-S engine in a Ford Puma File:Zetec SE 16 1.jpg|1.6-litre Duratec engine with TI-VCT in a 2012 Ford Focus
The Sigma engine was introduced under the Zetec-S name; after the upgrade it was renamed to Zetec-SE, Duratec and Duratec Ti-VCT. The latest upgrade of Sigma is called Ecoboost 1.6 engine (Not to be confused with the smaller 1.0 or larger 2.0/2.3 engines)
Zetec-S/SE
| Code | Years | Displacement | Bore x stroke | Power at rpm | Torque at rpm | Compression |
|---|---|---|---|---|---|---|
| 1.25 Zetec-S/SE | 1995– | 1242 cc | 71.9x76.5 mm | 75 PS at 5200 | 110 Nm at 4000 | 10.0:1 |
| 1.4 Zetec-S/SE | 1998– | 1388 cc | 76x76.5 mm | 75 PS at 5000 | 124 Nm at 3500 | 11.0:1 |
| 1995– | 90 PS at 5500 | 123 Nm at 4000 | 10.3:1 | |||
| 1.6 Zetec-S/SE | 1998– | 1596 cc | 79x81.4 mm | 100 PS at 6000 | 145 Nm at 4000 | 11.0:1 |
Zetec-S
The 1679 cc engines uses a heavily modified 1.4 L engine block and features Variable Cam Timing on the inlet camshaft. This displacement has only been used in the Ford Puma. A 155 PS version of this engine was developed for the Ford Racing Puma with only 500 units built.
Zetec RoCam
In 2000, Ford of Brazil developed a cheaper version of the Zetec-SE engine, to compete with the classic Volkswagen EA827 engine series known locally as (from Alta Performance, "High Performance" in English) engine in Brazil. It is 8v SOHC instead of 16v DOHC and its block is made of cast iron instead of aluminum. Also, its camshaft is driven by a chain instead of a belt. As a result this engine exhibits rougher behaviour, producing more vibration and noise.
On the other hand, it has a superb torque output thanks to the addition of the RoCam (Rollifinger Camshaft) feature. It's also a much smaller engine than the SE version, which allowed it to be installed on the Ford Ka, replacing the Endura-E engine which by that time was considered underpowered and outdated.
The engine also featured a new patented process for the aluminum head production, which resulted in a better alloy than those produced in Spain and UK, and at a lower production cost.
In 2002 a supercharged 1.0-litre 95 PS version was released for the Ford Fiesta, to compete with the 1.0 Turbo 16v 112 PS version of the Volkswagen Gol.
In 2001 the Zetec RoCam engine was introduced in Europe, but labeled as Duratec 8v, for the Ka and Fiesta. Later a 1.6-litre version was also released for the SportKa and StreetKa. The European versions of the engine are produced in the South Africa plant.
In October/2004 a newer bi-fuel version was introduced labeled "1.6 L Flex", capable of running on both petrol and ethanol, even mixed at any proportion. This version also featured a high compression ratio of 12.3:1 and "Compound High Turbulence" chambers, as used on the CHT engine. The 1.0 L Flex runs with a compression of 12.8:1.
Currently, this engine powers nearly all Brazilian Ford models – except those with 2.0 litre engines – in many different variants:
- 101/106 hp 1.6 L Flex (Ford Ka)
- 71/73 hp 1.0 L Flex (Ford Fiesta), 69/73 hp 1.0 L Flex after 2012 in Brazil
- 105/111 hp 1.6 L Flex (Ford Fiesta/ Fiesta Sedan), (Ford Focus), Ford EcoSport)
Applications
1596 or applications:
- 2003—2008 Ford SportKa 1.6, 95 PS and 100 lbft
- 2003—2006 Ford StreetKa 1.6, 95 PS and 100 lbft
Duratec
After an upgrade to the Sigma, Ford renamed it the Duratec.
| Code | Years | Displacement | Bore x stroke | Power | Torque | Compression |
|---|---|---|---|---|---|---|
| 1.25 Duratec | 2008– | 1242 cc | 71.9x76.5 mm | 60 PS | 109 Nm | 11.0:1 |
| 80 PS | 114 Nm | |||||
| 1.4 Duratec | 2002– | 1388 cc | 76x76.5 mm | 80 PS at 5700 | 124 Nm at 3500 | |
| 2008– | 96 PS | 125 Nm | ||||
| 1.6 Duratec | 2004– | 1596 cc | 79x81.4 mm | 100 PS at 6000 | 150 Nm at 4000 |
| Engine | Vehicle | Valve gear | Valves per cylinder | Camshaft drive | Crankshaft | Crankshaft bearings | Engine management | Fuel injection | Ignition | Emission control | Emission level | Lubrication system | Lubrication system capacity with/without filter (L) | Cooling system | Cooling system capacity, incl. heater | Fuel type | Fuel grade |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2008 1.25 Duratec 60/82 hp | |||||||||||||||||
| 2008 1.4 Duratec 96 hp | 2007 1.4 Duratec 80 hp | 2007 1.6 Duratec 100 hp | |||||||||||||||
| Fiesta Mk6 | Focus MkII face-lift | Focus MkII face-lift | |||||||||||||||
| DOHC, mechanical tappets, belt drive | |||||||||||||||||
| 4 | |||||||||||||||||
| Belt | |||||||||||||||||
| Spheroidal | |||||||||||||||||
| 5 | |||||||||||||||||
| Siemens | |||||||||||||||||
| EFI | |||||||||||||||||
| Electronic distributor-less, wasted spark | |||||||||||||||||
| Close-coupled, closed loop, three-way catalyst with oxygen sensor | |||||||||||||||||
| Euro4 | |||||||||||||||||
| Pressure-fed lubrication system with full flow oil filter | |||||||||||||||||
| 3.8/3.5 | 4.1/3.75 | ||||||||||||||||
| Water pump with thermostat and valves | |||||||||||||||||
| 5.5 | 5.8 | ||||||||||||||||
| ULP | |||||||||||||||||
| 95 RON |
Duratec Ti-VCT
The 1596 cc Ti-VCT (Twin independent Variable Camshaft Timing) version includes variable valve timing, and generates more power and torque than non-VVT counterparts. Latest versions comply with the Euro5 emission level.
| Code | Years | Displacement | Bore x stroke | Power | Torque | Compression |
|---|---|---|---|---|---|---|
| 1.5 Duratec Ti-VCT | 2013– | 1499 cc | 79x76.5 mm | 112 PS at 6300 | 140 Nm at 4300 | 11.0:1 |
| 1.6 Duratec Ti-VCT | 2004– | 1596 cc | 79x81.4 mm | 115 PS at 6000 | 155 Nm at 4150 | |
| 2007– | 110 PS at 6000 | 152 Nm at 4050 | ||||
| 125 PS at 6300 | 160 Nm at 4100 | |||||
| 2008– | 120 PS at 6300 | |||||
| 2010– | 105 PS at 6000 | 150 Nm at 4000–4500 | ||||
| 2011– | 134 PS at 6700 | 160 Nm at 4250 |
| Engine | Vehicle | Valve gear | Valves per cylinder | Included angle between valves | Valve sizes | Camshaft drive | Crankshaft | Crankshaft bearings | Engine management | Fuel injection | Ignition | Emission control | Emission level | Lubrication system | Lubrication system capacity with/without filter (L) | Cooling system | Cooling system capacity, incl. heater | Fuel type | Fuel grade |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2007 1.6 Duratec Ti-VCT 110 hp | |||||||||||||||||||
| 2007 1.6 Duratec Ti-VCT 125 hp | |||||||||||||||||||
| 2008 1.6 Duratec Ti-VCT 120 hp | |||||||||||||||||||
| 2010 1.6 Duratec Ti-VCT 120 hp | 2007 1.6 Duratec Ti-VCT 115 hp | 2011 1.6 Duratec Ti-VCT 105 hp/125 hp | |||||||||||||||||
| Mondeo | |||||||||||||||||||
| Mondeo face-lift | |||||||||||||||||||
| Fiesta Mk6 | Focus MkII face-lift | Focus MkIII | |||||||||||||||||
| DOHC, tappets | DOHC | DOHC, twin independent variable cam timing | |||||||||||||||||
| 4 | |||||||||||||||||||
| 41.75° | |||||||||||||||||||
| Intake 30 mm, exhaust 24.1 mm | |||||||||||||||||||
| Belt | Belt with dynamic tensioner | ||||||||||||||||||
| 4 counter-weights | Cast iron, 4 counter-weights | ||||||||||||||||||
| 5 | |||||||||||||||||||
| Siemens ECM EMS2101 16-bit | Siemens | Siemens ECM EMS2101 16-bit | |||||||||||||||||
| EFI | |||||||||||||||||||
| Tower coil | Electronic distributor-less | ||||||||||||||||||
| Hego/CMS dual binary sensors | Close-coupled, closed loop, three-way catalyst with oxygen sensor | ||||||||||||||||||
| Euro4 | Euro5 | ||||||||||||||||||
| Pressure-fed lubrication system with full flow oil filter | |||||||||||||||||||
| 4.1/3.75 | 4.1/ | ||||||||||||||||||
| Water pump with thermostat and valves | |||||||||||||||||||
| 6.0 | 5.5 | ||||||||||||||||||
| ULP | |||||||||||||||||||
| 95 RON |
Crate engine versions
Crate engine versions of Zetec-SE engines are sold by Ford Power Products under the name ZSG Range.
| Code | Years | Displacement | Bore x stroke | Power at rpm | torque at rpm | Compression |
|---|---|---|---|---|---|---|
| ZSG 414 | ?– | 1388 cc | 76x76.5 mm | 75 PS at 5700 | 124 Nm at 3500 | 11.0:1 |
| ZSG 416 | 1595 cc | 79x81.4 mm | 100 PS at 6000 | 146 Nm at 4000 |
Applications
| Displacement | ratings | vehicles | 1242 cc | 1388 cc | 1499 cc (with Ti-VCT) | 1596 cc | 1596 cc (with Ti-VCT) | 1679 cc (with VCT) |
|---|---|---|---|---|---|---|---|---|
| 60 PS, 109 Nm | ||||||||
| 75 PS at 6000, 110 Nm at 4000 | ||||||||
| 80 PS, 114 Nm | ||||||||
| 75 PS, 124 Nm | ||||||||
| 80 PS at 5700, 124 Nm at 3500 | ||||||||
| 90 PS, 125 Nm | ||||||||
| 96 PS, 125 Nm | ||||||||
| 112 PS, 140 Nm | ||||||||
| 100 PS at 6000, 145 Nm at 4000 | ||||||||
| 100 PS at 6000, 150 Nm at 4000 | ||||||||
| 115 PS at 6000, 155 Nm at 4150 | ||||||||
| 120 PS at 6000, 152 Nm at 4050 | ||||||||
| 105 PS at 6000, 150 Nm at 4000–4500 | ||||||||
| 110 PS at 6300, 160 Nm at 4100 | ||||||||
| 125 PS at 6000, 159 Nm at 4000 | ||||||||
| 126 PS at 6300, 157 Nm at 4500 | ||||||||
| 155 PS at 7000, 162 Nm at 4500 |
Current use
The Ford Sigma engine was produced at Bridgend Ford in Wales, U.K. until September 2020 and at Taubate Engine and Transmission Plant, Taubate, São Paulo, Brazil. Today the Sigma engine is used as the basis for the four cylinder Ford Ecoboost 1.5 litre and 1.6 litre engines. A 110 bhp version was used by Morgan for their 4/4 Roadster coupled to a Mazda transmission from 2009 until the model was discontinued in 2018.
1.25/1.4/1.6 L Sigma
These engines in the first generation Focus produced 75 and 100 bhp respectively, but for MkII Focus the 1.4 variant was slightly modified and produced 80 bhp. Both engines have belt driven camshafts and Electronic Fuel Injection systems. They weigh 90 kg. The 1.6 Ti-VCT was introduced in 2004, it features Variable Cam Timing; this 115 bhp version is used in MkII Focus. A new 105 bhp or 125 bhp EU5 version is used in the MkIII Focus, also a 1.6 L 120 hp version is used in Ford Fiesta Zetec-S. The Sigma is usually coupled to the Ford IB5 five-speed manual transmission.
Brazil
Recently the Sigma engine was present in modern Brazilian versions of the Fiesta, Focus and Ecosport (1.6 L TI-VCT version) and a 1.5 version was used by Ka. This engine was able to use the flex technology.
Power with ethanol:
-
1.5 L Sigma (non TI-VCT) — IB5+ manual transmission
- Fiesta (2014–2016) — 112 PS
- Ka (2014–2021) — 110 PS
-
1.6 Sigma (non TI-VCT) — IB5+ manual transmission (both) and PowerShift (Fiesta Only).
- Fiesta (2008–2014) — 116 PS
- Ecosport (2012–2023) — 116 PS
-
1.6 Sigma TI-VCT — IB5+ manual transmission and PowerShift.
- Focus (2013–2019) — 135 PS
- Fiesta (2008–2014) — 128 PS
- Ecosport (2012–2023) — 131 PS
-
In 2018 the Sigma engine was replaced in all Ford compact/subcompact cars to the newer and stronger "Dragon" engine, displacing 1.5 L with a 3-Cylinder layout and with a power output of 136HP.
Caterham usage
Some Caterham Cars use modified Ford Sigma engines such as the Caterham Seven 270, which uses a tuned Sigma engine producing 135 hp at 6,800 rpm as a modern equivalent to the original Ford Kent Crossflow engine used in the Lotus 7 from 1957 to 1972.
Ford Sigma 1.6-litre overview Technical features:
- a high level of running refinement and low emission levels
- aluminium alloy cylinder block and head
- cross flow cylinder head
- structural aluminium oil-pan for increased engine stiffness
- individual throttle bodies in place of the standard intake manifold
- twin overhead camshafts each with five bearings
- sequential multi-port fuel injection system
- long life, glass fibre reinforced camshaft drive belt with automatic tensioner
- state-of-the-art Twin Independent Variable Camshaft Timing (on Ti-VCT variant)
| Code | Displacement | Bore x stroke | Power at rpm | torque at rpm | Compression |
|---|---|---|---|---|---|
| Ford Sigma 1.6 | 1595 cc | 79x81.4 mm? | 125 PS at 6100 | 162 Nm at 5350 | 11.0:1 |
| 150 PS at 6900 | 162 Nm at 5600 | ||||
| Caterham Sigma 1.6 Ti-VCT EU4 | 115 PS at 6000 | 155 Nm at 4150 |
SCCA Spec Racer
The third generation of the SCCA Spec Racer, commonly known as the Gen3 was introduced in 2015, and uses the 1.6 L Sigma engine. The engine is sold by SCCA Enterprises as a sealed unit.
Zetec-E comparison
The Zetec-SE has no common parts or design with the larger Zetec-E engines apart from the name. This gives rise to some confusion since it suggests that they are members of the same family when they are, in fact, completely different. Zetec-E units are mounted transversely with the inlet manifold at the rear, whereas the Zetec-SE units are mounted with the inlet manifold at the front.
Replacement
In 2012 Ford replaced the Sigma engine with a brand new 3-cylinder 1.0-litre EcoBoost engine for some markets and models. The new engine provides more power and torque with less fuel consumption and lower emissions.
References
References
- [http://www.config.ford.co.uk/fordconnection/multimedia/gbr_en/00w/yyy/gbr_en00wyyyfuelspc.htm Fuel, performance and emissions Ford Fiesta], Ford.co.uk, 21 April 2009.
- Binon, Pascal. (March 16, 1996). "Un moteur Zetec léger, original et au bruit raffiné". [[Le Soir]].
- Lewin, Tony. (July 7, 1997). "Yamaha coats cylinders for Ford Puma". [[Automotive News]].
- "4/4: Specifications". The Morgan Motor Company.
- (December 2007). "Powertrain Product Guide, Issue no. 1". Ford Motor Company.
- Samardzich, Barb. (2010-04-20). "Customer Focused Technology Transition". Ford Motor Company.
- [http://uk.caterhamcars.com/cars/seven-270 caterhamcars.com]
- "Spec Racer Ford". SCCA Enterprises.
- [http://www.themotorreport.com.au/53407/ford-focus-picks-up-10-litre-ecoboost-australian-debut-unclear Ecoboost replaces Duratec], themotorreport.com.au, 05. February 2012.
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about Ford Sigma engine — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report