Skip to content
Surf Wiki
Save to docs
general/assault-tactics

From Surf Wiki (app.surf) — the open knowledge base

Fast-roping

Military technique

Fast-roping

Military technique

Fast-roping is a technique for descending a thick rope, allowing troops to deploy from a helicopter in places where the aircraft cannot touch down.

The person holds onto the rope with gloved hands (with or without using their feet) and slides down it. Several people can slide down the same rope simultaneously, provided that there is a gap of about 3 m between them, so that each one has time to get out of the way when they reach the ground.

Fast roping is quicker than abseiling (rappelling), although more dangerous, particularly if the person is carrying a heavy load, because the rope is not attached to them with a descender. The technique is particularly useful for naval infantry, who can use it to board ships at sea.

History

The technique was first developed by the UK with British rope manufacturer Marlow Ropes, and first used in combat during the Falklands War. The original rope was made of thick nylon that could be used in a manner akin to a fireman's pole. The special ropes used today are braided (plaited), producing a pattern on the outer circumference that is not smooth and so is easier to grip. Originally, each person reaching the bottom would then hold the rope to stabilize it for the next person, but this has been phased out.

Equipment and techniques

Rope

The rope must be thick, typically 40 mm (1.57 in) diameter, to prevent it from being wildly jerked about from the rotor blast of the helicopter. Some types have a weighted core, the ballast helping to combat the blast effect.

Glove techniques

Fast-ropers use heat-resistant gloves to protect their hands from the heat of friction while descending. Such gloves are generally not dextrous enough to be useful after the descent has been completed, though specialized gloves have been developed for this purpose. More often, a glove-inside-glove technique is used, with tactical gloves worn inside heavy leather metalworking gloves. After descending the rope, the wearer removes the outer gloves to regain dexterity.

Use of feet

Fast-roper using his feet while descending to control his speed.

While U.S. Marine Corps fast-ropers are trained to control their speed of descent by using their legs and feet (in addition to their hands) to help prevent their gloves from becoming too hot, the British military advises against use of the feet, as boot polish or boot leather can make the rope extremely slippery and thus make the descent more dangerous for subsequent fast-roping personnel.

Deployment of around 25 fast-ropers onto a ship can take about 30 seconds.

References

References

  1. Bianco, Michael. (21 June 2009). "31st MEU Marines Fast Rope and Hook N' Climb at Sea". [[Marines.mil]].
  2. Harrer, Jacob. (17 October 2013). "Fast roping prepares Marines for rapid ship-to-shore deployment". [[United States Marine Corps]].
  3. "Fast Rope Inspection Manual".
  4. See, for example, [https://patents.google.com/patent/US7954410 US Patent No. 7954410]
  5. Trew, Noel J. M.. (2012). "Putting Lives on the Line: The Fast Rope Glove Challenge".
  6. "The U.S. Navy's Combat Search and Rescue Units".
Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

Want to explore this topic further?

Ask Mako anything about Fast-roping — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report