Skip to content
Surf Wiki
Save to docs
general/fuel-technology

From Surf Wiki (app.surf) — the open knowledge base

Doctor sweetening process

Doctor sweetening process

Doctor Sweetening Process; version as patented by Kalinowsky (1954)

The doctor sweetening process is an industrial chemical process for converting mercaptans in sour gasoline into disulfides. Sulfur compounds darken gasoline, give it an offensive odor and increase toxic sulfur dioxide engine emissions. However, this process only reduces the odor.

These sulfur compounds can be removed with the following chemical reactions:G.L. Wendt, S.H. Diggs: The Chemistry of "Sweetening" in the Petroleum Industry, Industrial and Engineering Chemistry, Ausgabe 16, p. 1113-1115, 1924

:\overset{sour~gasoline}{2RSH} + {Na2PbO2} + S -[\text{in the presence of NaOH}] \overset{alkyl~disulfide}{R-S-S-R} + {PbS} + 2NaOH

Chemistry of the process

The chemistry of 'doctor sweetening' was described in detail by G. Wendt and S. Diggs in 1924. They also showed that the lead oxide solution brought about oxidation of the mercaptans to the corresponding organic disulfides, which are comparatively odourless. Lead oxide (litharge) dissolves in reasonably concentrated solutions of sodium hydroxide or potassium hydroxide owing to formation of a soluble compound, sodium plumbite: :PbO + 2NaOH - Na2PbO2 + H2O

When this alkaline solution is agitated with petroleum, the two liquids do not dissolve in one another, but any mercaptan in the oil will unite with an equivalent amount of the lead (which then passes into the petroleum) to form what is called a lead mercaptide, soluble in the oil:

:2RSH + Na2PbO2 - (RS)2Pb + 2NaOH

If the mixture is now treated with powdered sulfur, which has a high affinity for lead, a black suspension of lead sulfide forms, and conversion of the mercaptide into a so-called disulfide (which remains in the oil) is induced: : -(RS)2Pb + S - RS-SR + PbS

With no sulfur added, but in the presence of atmospheric oxygen, the same conversion occurs, but only slowly, and probably not completely: : 2(RS)2Pb + 4NaOH + O2 - 2RS-SR + 2Na2PbO2 + 2H2O

It is evident that the process does not remove the sulfur from the oil but even may increase the sulfur content if too much powdered sulfur is added, and some of the lead may remain in the petroleum.

The described chemistry is also the basis of the doctor test for the sweetness or sourness of gasoline (i.e., the extent of sulfur contamination). A gasoline is described as doctor sweet if, after shaking with sodium plumbite solutions, the addition of powdered sulfur fails to produce a dark precipitate of lead sulfide.

Literature

References

References

  1. McGraw-Hill Dictionary of Scientific and Technical Terms, 6th edition, published by The McGraw-Hill Companies, Inc., 2003
Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

Want to explore this topic further?

Ask Mako anything about Doctor sweetening process — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report