CompactPCI PlusIO

History

The CompactPCI standard uses one main bus connector, J1, and defines user I/O pins and a 64-bit extension for the legacy PCI bus on connector J2. J1 and J2 are the only connectors on 3U single Eurocards. The CompactPCI definition for 6U double Eurocards includes additional connectors (J3, J4, J5) for rear I/O. A true rear I/O standard, however, exists only for J3 – through the PICMG 2.16 CompactPCI Packet Switching Backplane specification that defines Ethernet interfaces at the backplane of 6U cards. Fast serial point-to-point connections have become the state-of-the-art technology and are gradually replacing the classic bus architecture in computers.{{cite web The CompactPCI standard as it is does not offer a standardized solution for the kind of modular connectivity requested for the future. The additional PICMG 2.30 CompactPCI PlusIO specification provides this connectivity on the well-known platform of CompactPCI. It stays compatible with but extends the existing standard by a new definition of the rear J2 connector, adding a number of serial interfaces to provide fast and standardized rear I/O also on 3U format. Through these serial point-to-point connections, CompactPCI PlusIO also bridges the gap between parallel CompactPCI and the serial CompactPCI Serial standard.

Interfaces

PICMG 2.30 CompactPCI PlusIO standardizes the following interfaces at the rear J2 connector:

• 4 x PCI Express (one lane each)
• 2 x Ethernet 1000BASE-T
• 4 x USB 2.0
• 4 x SATA/SAS

Backplane connectors

The PICMG 2.30 extension introduces a new J2 connector type on the plug-in board, an Ultra Hard Metric (UHM) connector with virtual coaxial box shielding technology, which reduces crosstalk at high speeds. This connector supports high frequencies of 5 Gbit/s, even when mated with the CompactPCI-standard unshielded 2-mm hard-metric headers. The matching P2 backplane connector remains the same as for CompactPCI, as do the J1/P1 connectors.

Compatibility with Legacy CompactPCI and CompactPCI Serial

PICMG 2.30 gives the J2 pins a fixed interface functionality. This makes 64-bit bus communication impossible. The new J2 connector type itself is 100% compatible with the legacy one. The J1 bus connector conforms with the CompactPCI definition. In all, CompactPCI PlusIO is 100% compatible with legacy 32-bit CompactPCI in 3U and 6U format (single and double Eurocards). At the same time, its serial rear I/O connectivity and higher-speed connector form a bridge towards future CompactPCI Serial system architecture. Hybrid backplanes support several cards of the three different standards PICMG 2.0, 2.30, and CPCI-S.0.{{cite web

References

References

1. [http://www.picmgeu.org/specs/available_specifications.htm PICMG 2.0] {{webarchive. link. (June 26, 2012)
2. [http://www.picmgeu.org/specs/available_specifications.htm PICMG 2.16] {{webarchive. link. (June 26, 2012)