Skip to content
Surf Wiki
Save to docs
general/units-of-pressure

From Surf Wiki (app.surf) — the open knowledge base

Centimetre or millimetre of water

Unit of pressure


Unit of pressure

FieldValue
namecentimetre of water
quantityPressure
symbolcmH2O
units1SI units
inunits198.0665 Pa
units2English Engineering units
inunits2

A centimetre or millimetre of water (US spelling centimeter or millimeter of water) are less commonly used measures of pressure based on the pressure head of water.

Centimetre of water

A centimetre of water is a unit of pressure. It may be defined as the pressure exerted by a column of water of 1 cm in height at 4 °C (temperature of maximum density) at the standard acceleration of gravity, so that 1 cmH2O (4°C) = 999.9720 kg/m3 × 9.80665 m/s2 × 1 cm = 98.063754138 Pa ≈ 98.0638 Pa, but conventionally a nominal maximum water density of 1000 kg/m3 is used, giving 98.0665 Pa.

The centimetre of water unit is frequently used to measure the central venous pressure, the intracranial pressure while sampling cerebrospinal fluid, as well as determining pressures during mechanical ventilation or in water supply networks (then usually in metres water column). It is also a common unit of pressure in the speech sciences. This unit is commonly used to specify the pressure to which a CPAP machine is set after a polysomnogram.

:{
1 cmH2O (conventional)
-
= 0.01 metre water (mH2O), metre water column (m wc) or metre water gauge (m wg)
-
= 10 mm wg
-
= mbar or hPa
-
≈ inH2O
-
≈ atm
-
≈ torr
-
≈ mm Hg
-
≈ inHg
-
≈ psi
}

Millimetre of water

Millimetre of water (US spelling millimeter of water) is a unit of pressure. It may be defined as the pressure exerted by a column of water of 1 mm in height at 4 °C (temperature of maximum density) at the standard acceleration of gravity, so that 1 mmH2O (4 °C) = 999.9720 kg/m3 × 9.80665 m/s2 × 1 mm = 9.8063754138 Pa ≈ 9.80638 Pa, but conventionally a nominal maximum water density of 1000 kg/m3 is used, giving 9.80665 Pa. :{| |- | 1 mmH2O (conventional) || = 9.80665 pascals |-

= 0.001 metre water (mH2O), metre water column (m.wc) or metre water gauge (m wg)
= 0.1 cm wg
-
= mbar or hPa
-
≈ inH2O
-
-
≈ torr
-
≈ mmHg
-
≈ inHg
-
≈ psi
}

In limited and largely historic contexts it may vary with temperature, using the equation: : P = ρ·g·h/1000, : where : P: pressure in Pa : ρ: density of water (conventionally 1000 kg/m3 at 4 °C) : g: acceleration due to gravity (conventionally 9.80665 m/s2 but sometimes locally determined) : h: water height in millimetres.

The unit is often used to describe how much water rainwear or other outerwear can take or how much water a tent can resist without leaking.

References

References

  1. NOTE: A centimetre of water is abbreviated as ''cm{{H2O'' or ''cm H2O''.
  2. [http://physics.nist.gov/cuu/pdf/sp811.pdf nist.gov – Guide for the Use of the International System of Units (SI)] page 47, 2008 Edition
  3. NOTE: Millimetre of water is also sometimes addressed as : ''millimetres water column'', abbreviated as ''mmwg'', ''mmH2O'', or ''mmwc''.
Info: Wikipedia Source

This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.

Want to explore this topic further?

Ask Mako anything about Centimetre or millimetre of water — get instant answers, deeper analysis, and related topics.

Research with Mako

Free with your Surf account

Content sourced from Wikipedia, available under CC BY-SA 4.0.

This content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.

Report