From Surf Wiki (app.surf) — the open knowledge base
Cameron D-38
| Field | Value |
|---|---|
| name | D-38 |
| aircraft_type | Hot air airship |
| national_origin | United Kingdom |
| manufacturer | Cameron Balloons |
| number_built | 4 by early 1984 |
| first_flight | 25 September 1980 (powered airship) |
The Cameron D-38 is a single seat hot air filled airship, designed and built in the United Kingdom in 1980. The D-50 has a larger volume envelope for thinner or hotter atmospheres. Together, their sales reached double figures.
Design and development
Having gained thermal airship (hot air airship) experience with their D-96, the first of its kind and a two to three seater, Cameron next produced the single seat D-38. Its prototype began life and was flown as a hot air kite balloon, which was to have been marketed as the C-38, the -38 stating the envelope volume in thousands of cubic feet. Instead, an engine was added and the D-38 flew for the first time at Ashton Park, Bristol on 25 September 1980.
The D-38 is a non-rigid airship with a small, steel framed gondola containing the pilot, a single propane burner and its fuel. A 250 cc Fuji Robin two-stroke engine, driving a semi-shrouded two blade propeller, is attached to the rear of the gondola. Hot air from the burner is directed into the envelope by a roughly conical, central, ventral extension. There are three strongly swept stabilizing fins at the rear of the envelope, two horizontal and one vertical. These are inflated with air from the propeller, collected by a projecting scoop and passing along a fabric ventral tunnel.
Tests of the D-38 showed it was not large enough to cope with hot and high environments, so a version with an envelope linearly enlarged by 9.4% and a volume of 50,000 cu ft (1,416 m³) was produced, designated the D-50. As well as being larger, the D-50 had a revised tail, with four almost rectangular, low aspect ratio surfaces, two vertical and two horizontal. The D-50 first flew on 2 September 1981.
Operational history
Three D-38s appeared on the UK civil aircraft register, all de-registered by 2012. One D-38 remained on the Spanish civil aircraft register in 2010. One D-38 has appeared on the FAA (U.S.A) register.
On 27 August 1982 Ron Taafe in Australia set a series of FAI recognized records for BX class dirigibles in a D-38: altitude, 10,364 ft (3,159 m); distance, 23.03 mi (37.07 km) and duration, 86 mim 52 s.
Eleven D-50s had been built by the start of 1984. In 2010 there were two on the Spanish register and one on each of the French and German registers; the French example was previously on the UK register. Five have appeared on the UK register, though all are now de-registered. Three have appeared on the FAA register.
Variants
;D-38: Original 38,000 cu ft airship, triple, swept tail. ;D-50: Larger, 50,000 cu ft version with cruciform tail.
Specifications (D-38)
|prime units?=met General characteristics
|max takeoff weight kg= |max takeoff weight lb=760 |max takeoff weight note= Powerplant
Performance
|never exceed speed kmh= |never exceed speed mph= |never exceed speed kts= |never exceed speed note= |minimum control speed kmh= |minimum control speed mph= |minimum control speed kts= |minimum control speed note=
References
References
- Taylor, John W. R.. (1984). "Jane's All the World's Aircraft 1984-1985". Jane's Publishing Co..
- Partington, Dave. (2010). "European registers handbook 2010". Air Britain (Historians) Ltd.
- "CAA technical data sheet".
- "D-38 on CAA register".
- "D-50 on CAA register".
- "D-38 on FAA register".
- "D-50 on FAA register".
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about Cameron D-38 — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report