From Surf Wiki (app.surf) — the open knowledge base
Bilgeboard
Lifting foil used in a sailboat
Lifting foil used in a sailboat
A bilgeboard is a lifting foil used in a sailboat, which resembles a cross between a centerboard and a leeboard. Bilgeboards are mounted between the centerline of the boat and the sides, and are almost always asymmetric foils mounted at an angle to maximize lateral lift while minimizing drag. They are most often found on racing scows.
When sailing, the windward side bilgeboard is retracted into the hull of the boat, so that it produces no drag. The leeward side foil provides the lift to counter the lateral force of the sail, and converts it into forward motion. The bilgeboards are angled so that as the boat heels, or leans under the force of the wind, the leeward bilgeboard becomes more upright, and provides the greatest possible force in the desired direction.
Like a centerboard, the bilgeboard can be used as a recovery platform upon which to stand in the event the dinghy overturns via a capsize or turtle.
The Red Fox is a modern cruising yacht that uses bilgeboards to allow a lifting keel with minimal interference in cabin space.
When the craft is moving, the bilgeboard acts as a lifting foil.
References
References
- [https://swiftredfoxvision.wordpress.com/ Swift – A Red Fox Vision Yacht]
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about Bilgeboard — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report