A Scow

Production

The design was initially built by Johnson Boat Works in White Bear Lake, Minnesota United States, but that company closed in 1998 and production passed to Melges Performance Sailboats, who continue to build it.

Design

The A Scow traces its origins back to a Johnson-designed prototype in 1896. Over time the class has changed and evolved into essentially a one design class today. At 38.00 ft length overall, the design is the largest scow raced today and is one of the largest dinghies produced.

The A Scow is a racing sailboat, with the early versions built from wood and the more recent ones built predominantly of fiberglass. It has a fractional sloop with a masthead spinnaker. The hull is a scow design with a raised counter, vertical transom; dual spade-type rudders controlled by dual tillers and dual retractable centerboards. It displaces 1850 lb and carries no ballast.

The boat has a draft of 4.00 ft with a centerboard extended and 1.00 ft with both retracted, allowing beaching or ground transportation on a trailer.

For sailing the design is equipped with an asymmetrical spinnaker of 1200 sqft, flown from a retractable bowsprit.

The design is raced with a crew of at least five sailors and normally has a total of six or seven crew members to help balance the boat.

Operational history

The boat is supported by a national class club, the National Class A Scow Association, which regulates the class and organizes races. The A Scow is mostly raced on lakes in the midwestern United States.

A film was made about racing A Scows, The Ultimate Ride, by racer Peter Crawford.

A review in Sailing World in 2006 by Gary Jobson, wrote, "these boats sail best when heeled more than 20 degrees, and in a breeze, it takes a lot of courage to do this. The boat rocks up and you feel as if you're about to be catapulted out of the cockpit. But a subtle tug on the tiller, a slight ease of the main and spinnaker sheets, and zingo, you're sailing at 25 knots. There's no crew weight limit, so depending on the wind strength, 5 to 7 crew can be piled on the rail with sailors rotating on or off in between races."

References

References

1. McArthur, Bruce. (2020). "A Scow sailboat". sailboatdata.com.
2. Victory by Design, LLC. "Design Story". victorybydesign.org.
3. McArthur, Bruce. (2020). "Melges Performance Sailboats". sailboatdata.com.
4. McArthur, Bruce. (2020). "Johnson Boat Works (USA) 1896 - 1998". sailboatdata.com.
5. Melges Performance Sailboats. (2020). "The Melges A Scow". melges.com.
6. McArthur, Bruce. (2020). "National Class A Scow Association". sailboatdata.com.
7. Jobson, Gary. (4 October 2006). "The Ultimate Ride, Indeed". Sailing World.