From Surf Wiki (app.surf) — the open knowledge base
Chrysler 3.3 & 3.8 engines
_engine.jpg)
| Field | Value | |
|---|---|---|
| name | [[File:Chrysler starlogo.svg | 120px]] 3.3 & 3.8 engines |
| image | 2005 Chrysler Town and Country LX 3.3 engine.JPG | |
| manufacturer | Chrysler Corporation (1989-1998) | |
| DaimlerChrysler AG (1998–2007) | ||
| Chrysler LLC (2007–2009) | ||
| Chrysler Group LLC (2009-2011) | ||
| production | 1989–2011 | |
| predecessor | ||
| successor | Chrysler Pentastar engine | |
| configuration | Naturally aspirated 60° V6 | |
| block | Cast iron | |
| head | Aluminum | |
| valvetrain | OHV 2 valves per cyl. | |
| timing | Timing Chain | |
| compression | 8.9:1-9.6:1 | |
| fuelsystem | Sequential MPFI | |
| fueltype | ||
| oilsystem | Wet sump | |
| coolingsystem | Water-cooled | |
| bore | 93 mm | |
| 96 mm | ||
| stroke | 81 mm | |
| 87 mm | ||
| displacement | 3301-3778 cc | |
| power | 150-215 hp | |
| torque | 180-245 lbft |
DaimlerChrysler AG (1998–2007) Chrysler LLC (2007–2009) Chrysler Group LLC (2009-2011) 96 mm 87 mm The Chrysler 3.3 and 3.8 engines are V6 engines used by Chrysler from 1989 to 2011. This engine family was Chrysler's first 60° V6 engine designed and built in-house for front wheel drive vehicles, and their first V6 not based on a V8. It was designed as a larger, more powerful alternative to the Mitsubishi 3.0 V6 in the minivans and debuted in 1989 for the 1990 model year. They were later also used in some rear wheel drive cars like the Jeep Wrangler.
The engines were produced in two major variants differing by their piston displacement: a 3301 cc and a 3778 cc. The 3.3 was dropped after 2010 with the Chrysler minivans, and the 3.8 was dropped after 2011 with the Jeep Wrangler, ending 22 years in production.
Specifications
History
The original 3.3 engine, as well as the larger 3.8, are pushrod engine designs. The 3.3 was introduced in 1989 with the 1990 Chrysler Imperial, New Yorker, and related K-series models, and was joined in 1991 by the 3.8. Production on the 3.3 was stopped in 2010 after a run of 5,076,603 engines, while the 3.8 remained in production until May 2011 in Trenton, Michigan for the Jeep Wrangler. Both use a cast iron block and aluminum heads.
3.3
The first of the family, the 3.3 liter engine's actual piston displacement is 3301 cc with a 93x81 mm bore and stroke. In 1994, the 3.3 received a 12 hp increase in power to 162 hp due to a new air intake. In 2001, the engine was fitted with a variable intake control system which boosted output to 180 hp at 5000 rpm and 210 lbft at 4000 rpm. The engine was especially suited for transverse applications in Chrysler's minivans, but was also used in a longitudinal front-wheel-drive setup on 1993-1997 LH platform cars. It was last used in 2010 for Chrysler minivans before the introduction of the new 3.6 L Pentastar engine for the 2011 model year.
Designated EGA, the 3.3 was built at Trenton Engine in Trenton, Michigan. It uses Sequential fuel injection, has roller tappets and features forged steel connecting rods, a one-piece cast camshaft, and either a cast aluminum or reinforced plastic intake manifold. The 3.3 has a timing chain, and is an interference engine meaning that the valves will collide with the pistons in the event of a timing chain failure.
Vehicles using the 3.3 include:
- 1990–1993 Dodge Dynasty, Chrysler New Yorker, Chrysler Imperial, (replaced the 3.0 L Mitsubishi 6G72 engine)
- 1990–2010 Chrysler minivans
- 1993–1997 Chrysler Concorde/Dodge Intrepid/Eagle Vision
3.8
The 3.3 was bored and stroked to 3.78x3.43 in to create a 3778 cc version. This EGH version was also built at Trenton Engine in Trenton, MI.
The 3.8 received an increase in power of 12 hp, for a total of 162 hp in 1994 via a new intake system. In 1998 the compression ratio increased for a total of 180 hp and 240 lbft. In 2001, like the 3.3 the 3.8 received the symmetrical reinforced plastic intake plenum and revised camshaft which boosted output to 215 hp at 5000 rpm with 245 lbft at 4000 rpm.
Vehicles using the 3.8 include:
- 1991–1993 Chrysler New Yorker and Chrysler Imperial 150 hp, 213 lbft
- 1994–2010 Chrysler minivans
- 2007–2011 Jeep Wrangler (JK)
- 2009–2010 Volkswagen Routan
SOHC
:
A single overhead camshaft was an addition to the lineup for 1993. Introduced with the 3.5 L engine, this design spawned the DOHC 2.7 L Chrysler LH engine, as well as the 3.2 L and 4.0 L variants.
References
References
This article was imported from Wikipedia and is available under the Creative Commons Attribution-ShareAlike 4.0 License. Content has been adapted to SurfDoc format. Original contributors can be found on the article history page.
Ask Mako anything about Chrysler 3.3 & 3.8 engines — get instant answers, deeper analysis, and related topics.
Research with MakoFree with your Surf account
Create a free account to save articles, ask Mako questions, and organize your research.
Sign up freeThis content may have been generated or modified by AI. CloudSurf Software LLC is not responsible for the accuracy, completeness, or reliability of AI-generated content. Always verify important information from primary sources.
Report